SOFTWARE GP-IMPLEMENT 3634113 - Caterpillar

Place spool assembly (30) into Tooling (A). Install Tooling (A) into a suitable vise. Remove bolt (33) and spring (34). Remove cover (35) .
Illustration 17 g01963513
Remove plug (36). Remove bolts (37). Remove seal (38) .
Illustration 18 g01963517
Remove O-ring seal (39) .
Illustration 19 g01963518
Rotate the valve to the other side and remove plug (40). Use Tooling (B) in order to remove plug (41) .
Illustration 20 g01973933
Remove bucket valve (42) .
Repeat Steps 12 through 18 in order to disassemble the bucket valve (42) .
Illustration 21 g01963613
Remove plugs (43) .
Illustration 22 g01963674
Remove relief valve (44) and check valve (45) .
Repeat Steps 12 through 18 in order to disassemble the bucket valve.
Illustration 23 g01964615
Remove swing valve (46) .
Repeat Steps 12 through 18 for swing valve (46) .
Illustration 24 g01964616
Remove stick valve (47).
Repeat Steps 12 through 18 for stick valve (47) .
Illustration 25 g01964619
Remove valve (48) .
Repeat Steps 12 through 18 for boom valve (48) .
Illustration 26 g01964617
Remove auxiliary valve (49) .
Repeat Steps 12 through 18 for auxiliary valve (49) .
Illustration 27 g01964620
Remove stabilizer valve (50) .
Repeat Steps 4 through 10 for stabilizer valve (50) .
Illustration 28 g01964622
Remove rods (51) from inlet manifold (52) .
Illustration 29 g01964623
Remove plug (53) .
Illustration 30 g01964734
Rotate the valve to the other side,in order to remove plug (54) .