SOFTWARE GP- 4209393 - Caterpillar

Illustration 1 g02565541
Table 1
Specification for 358-9618 Oil Pan Gp
Item Qty Part Specification Description
- 15 1A-2029 Bolt Use the following procedure in order to tighten the bolts:
1. Tighten five bolts (11) to a standard torque.
2. Tighten bolt (1) through bolt (10) in a numerical sequence that is shown in Illustration 1 to a standard torque.
12 - - Before assembly, apply red Loctite 596, or Permatex No. 2 to the joints of the gasket.
13 - - Before assembly, lightly lubricate the bore for the O-ring seals with the lubricant that is being sealed or an approved equivalent.
14 1 7E-2630 Oil Pan Gasket Before assembly, apply red Loctite 596, or Permatex No. 2 to the sealing surface.
15 1 142-4159 Integral Seal Before assembly, apply red Loctite 596, or Permatex No. 2 to the sealing surface.
16 38 5P-5855 Bolt Apply green Loctite 290 to the open top end of the bolt holes after assembly of the oil pan.
17 1 4B-2363 Oil Drain Plug Torque to 145 15 N m (107 11 lb ft).
18 1 6I-0723 Oil Drain Plug Torque to 55 7 N m (41 5 lb ft).