SOFTWARE GP-MACHINE 4352667 - Caterpillar

Illustration 4 g03343224
To access the Payload Page, press the Payload Button (5) on the Main Performance Page. (5) Payload ButtonPress a button on the Payload Page to view information and adjust settings. Illustration 6 references Payload Page buttons and symbols.
Illustration 5 g03343338
Payload PagePayload Page Symbols ( 988 T4f and 988 LRC)
Illustration 6 g03343758
Payload Print ( 988 T4f and 988 LRC only)
Payload Print Path:
Payload > Print
Payload > Print > Truck Summary
Payload > Print > Material Summary
Payload > Path > Last Stored
Illustration 7 g03344126
Press the Print Button (7) for the Print page to appear. (7) Print Button
Illustration 8 g03344163
(8) Press this button for "Truck" Summary. (9) Press this button for "Material" Summary. (10) Press this button for "Last Stored" Summary.How to Navigate Display Feature Menus: Illustrations and Path Examples
This section is designed to help the user navigate Display feature menus and submenus with the use of illustrations and path examples. How to Change Settings Using Increment Bars
Illustration 9 g03344290
In this first example, follow the steps below to set Payload Weigh Range percentages.
Press the "Machine" button (2) located on the right side of the display.
Press the "Settings" button. The button will highlight in yellow. Press "OK" to set.
Press the "Payload" button. The button will highlight in yellow. Press "OK" to set.
Press the "Set Weigh Range" button. The button will highlight in yellow. Press "OK" to set.
Illustration 10 g03344307
(11) Back Button
"Enter Upper and Lower Linkage for Weigh" will appear on the left of the page.
Use the Increment Bar to set "Weigh Range" and "Lower Limit" percentages.
Press the "-" button or the "+" button to decrease or increase the percentages.
When a desired number appears, press "OK" to set. Note: The newly-set number will appear in white text. "Lift Cylinder" will appear as a fixed percentage.
To remove the keypad from the screen, press the Back button (11) .
Press the Back button (11) again to return to the previous menu.The same written navigational path for the above illustration would appear in the guide as:
(Path): Machine > Settings > Payload > Set Weigh RangeHow to Change Settings Using Increment Bars with Keypads
On some menus in the Display, the user adjusts values and percentages using the increment bar and a keypad. In this example, within the "Ride Control" menu and submenus, follow the steps below to change the "Forward Activation Speed" and the "Reverse Activation Speed".
Illustration 11 g03344357
(12) "Enter Data" Button
Illustration 12 g03362747
"Enter Data" Button
Press the "Machine" button (2) on the right side of the Display.
Press the "Settings" button. The "Settings" button will highlight in yellow. Press "OK" to set.
Press the "Ride Control" button. The "Ride Control" button will highlight in yellow. Press "OK" to set.
On the "Ride Control" page, press the "Enter Data" button (12) on the "Forward" and "Reverse" Increment Bars. A keypad will appear.
Illustration 13 g03344373
On the keypad, type in a desired number for the "Forward Activation Speed" and for the "Reverse Activation Speed" (n/min).
Press "OK" to set.
To remove the keypad from the screen, press the Back button (11) .