AVSPARE.COM
parts catalog

SOFTWARE GP-MACHINE 4415617 - Caterpillar



4415617 SOFTWARE GP-MACHINE Caterpillar parts 797B SOFTWARE
Rating:
10
Alternative (cross code) number:
CA4415617
441-5617
4415617
Caterpillar 4415617 SOFTWARE GP-MACHINE

Buy SOFTWARE GP-MACHINE 4415617 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 4415617:

TRUCK  797B   Caterpillar
  For full view, you need register

Information:

1. Remove clamps (6) on each side of bracket (3).2. Remove the bolts holding bracket (3) in position and remove the bracket.3. Disconnect fuel lines (2) and (4) from the fuel transfer pump.4. Remove two mounting bolts (5) and fuel transfer pump (1).5. Install protective caps on fuel lines (2) and (4). The following steps are for installation of the fuel transfer pump.6. Install fuel transfer pump (1) with a new gasket and O-ring seal.7. Install bolts (5).8. Remove the protective caps and install fuel lines (2) and (4).9. Install bracket (3) and clamps (6).10. Use the fuel priming pump to remove air from the system.Disassemble & Assemble Fuel Transfer Pump
Start By:a. remove fuel transfer pump 1. Remove two bolts and retainers (2) and tachometer drive (1). 2. Remove O-ring seal (3).3. Remove three bolts (4) and three allen bolts (6).4. Remove cover (7) from the pump body and lip type seal (5). 5. Separation of pump body (8) and cover (7). Remove plug (9) from cover (7). 6. Remove plug (9), seal (10), spring (11) and valve assembly (12) from the cover.7. Remove lip type seal (5) if necessary. 8. Remove shaft assembly (14) and gear (15) from pump body (8). 9. Remove idler shaft (16), check valve (17) and bushing (18). 10. Remove O-ring seal (19). Remove bushing (20) and the two lip type seals (21) if necessary. Assemble in reverse order.11. Assemble cover (7) to body (8) using 6V-6652 Gasket Eliminator. Use the silk screen method to apply the gasket material. Do not get gasket material in the pump cavity.End By:a. Install the fuel transfer pump.


Parts software Caterpillar catalog:

3930419 SOFTWARE GP-MONITOR
785C, 785D, 789C, 793D, 793F, 797B, 797F
4157486 SOFTWARE GP-MONITOR
725, 725C, 730, 730C, 735, 735B, 740, 740B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.