SOFTWARE GP-MACHINE 5094172 - Caterpillar

2. Remove four bolts (4). Remove center drive shaft group (2) from the machine. The weight of the center drive shaft is 70 lb. (32 kg).3. Remove universal joints (1) and (5) from the center drive shaft group.Install Center Drive Shaft
1. Install universal joints (1) on the center drive shaft. Tighten the bolts to a torque of 100 11 lb.ft. (135 15 N m).2. Put center drive shaft (2) in position on the transfer gear yoke. Install the bolts that hold it. Tighten the bolts to a torque of 100 11 lb.ft. (135 15 N m). 3. Connect the center drive shaft (2) to the yoke of the front drive shaft. Install the bolts that hold it. Tighten the bolts to a torque of 100 11 lb.ft. (135 15 N m).