SOFTWARE GP-MONITOR 5600286 - Caterpillar

Removal Procedure
Personal injury or death can result from improper lifting or blocking.When a hoist or jack is used to lift any part or component, stand clear of the area. Be sure the hoist or jack has the correct capacity to lift a component. Install blocks or stands before performance of any work under a heavy component.Approximate weights of the components are shown. Clean all surfaces where parts are to be installed.
Hood
Illustration 1 g00919246
Raise hood (1). Attach a suitable nylon lifting around the hood and to a suitable hoist. Take up the tension in order to support the hood.
Illustration 2 g00919286
Disconnect gas spring assembly (2) from bracket (3) .
Illustration 3 g00919669
Remove bolts (4) and the washers which secure hood (1) to mounting brackets (5).
Use the hoist and remove hood (1) from the machine. The weight of the hood is approximately 28 kg (62 lb).Panel Group
Illustration 4 g00919670
Remove bolts (1) and the washers in order to remove rear panel (2) from the machine.
Illustration 5 g00919671
Remove bolts (3) and the washers in order to remove front panel (4) from the machine.Installation Procedure
Panel Group
Illustration 6 g00919671
Position front panel (4) and install bolts (3) with the washers.
Illustration 7 g00919670
Position front panel (2) and install bolts (1) with the washers.Hood
Illustration 8 g00919246
Attach a suitable nylon lifting around hood (1) and to a suitable hoist. Lift the hood into position on the machine. The weight of the hood is approximately 28 kg (62 lb).
Illustration 9 g00919669
Align hood (1) with mounting brackets (5) and install bolts (4) with the washers in order to secure the hood.
Illustration 10 g00919286
Connect gas spring assembly (2) to bracket (3) .
Remove the nylon lifting sling and the hoist before closing the hood.