SOLENOID VALVE SUB ASSY. B 0861824 - Caterpillar

Select Horizontal Alignment
In most cases, use the "Guide to Horizontal Alignment" dialog to select a design feature to use as a horizontal guidance alignment. The exceptions are:
If the only possible alignments in the loaded design are Site Map or Background Plan features, the "Guide to Horizontal Alignment" dialog is skipped, and the graphical selection screen appears.
If you require guidance to side slopes in a road design.To select a feature to use as a horizontal guidance alignment, complete the following steps:
From any of the guidance views, press the "H. Offset" soft key. The "Guide to Horizontal Alignment" dialog appears. The following example shows the choices available in a .dc road design. Refer to Illustration 13.
Illustration 13 g01261553
Highlight the required alignment option. The following options may be available in the "Guide to Horizontal Alignment" dialog:
Select a road alignment in a road design by choosing the alignment by name.
Select a road alignment in a .svd road design automatically by choosing "Auto Select Road Alignment".
Select a layered lift alignment in a .dc road design by choosing one of the "Layered Lift Alignment" options.
Select a 3D line in a 3D Lines design by choosing "3D line".
Select the master alignment in a sloping surface design by choosing "Master Alignment".
Select the design boundary or linework in the Site Map or Background Plan by choosing "Plan Line".
Select "None" in order to deselect any alignments.
If you are required to select a plan line, a dialog showing a plan view of the site appears. Refer to Illustration 14.Use any of the following tools to move the cross-hairs:
Use the arrow keys to move the cross-hairs around the screen
Press "Zoom in" and "Zoom out" to zoom the current view in and out
Press "Zoom Target" to resize the current view to the immediate area around the cross-hairs
Press "Zoom All" to view all of the lineworkAll linework for the design, including the site map and any avoidance zones, are shown in this dialog.Note: If several lines are grouped closely, press "Zoom Target" to zoom in for easier selection. Alternatively, move the cross-hairs to an area where the lines are more easily seen. In order to move the cross-hairs large distances across the screen, zoom out and then hold down an arrow key. This lets you move rapidly across the design.
Illustration 14 g01261554
Press "Select" to select the line for horizontal guidance. The line closest to the center of the crosshairs is selected. The selected line appears as a thick red line.
Press "OK" in order to confirm the settings, or press "ESC" in order to exit without saving. You are returned to a guidance screen.Set Horizontal Offset
In order to set an offset from the horizontal guidance alignment, complete the following steps:
If you have not already done so, select an alignment as described in "Select Horizontal Alignment". Until an alignment is specified, any horizontal offset will have no effect.
From any of the guidance views, press "H. Offset". The "Horizontal Offset" dialog appears. The example in Illustration 15 shows the "Horizontal Offset" dialog when a road alignment has