SOLENOID AS 1129034 - Caterpillar

Governor - U.S.A. Manufactured Machines
To prevent engine damage, the governor must be out of slow range when operating hydraulic controls.
Engine Stopped (1.) - Move the lever all the way forward to stop the engine. Slow (2.) - Move the lever to this position to decrease the engine speed. Increase the engine speed before operating the hydraulic controls or travel pedals. Economy (3.) - Move the lever to this position for lower fuel consumption, decreased engine speed and quieter operation. Fast (4.) - Move the lever to the rear (past the ECONOMY) offset position) to increase the engine speed. Use this position for maximum production work.Governor - Other than U.S.A. Manufactured Machines
To prevent engine damage, the governor must be out of slow range when operating hydraulic controls.
Slow (1.) - Move the lever to this position to decrease the engine speed. Economy (2.) - Move the lever to this position for lower fuel consumption, decreased engine speed and quieter operation. Fast (3.) - Move the lever to the rear (past the ECONOMY offset position) to increase the engine speed. Use this position for maximum production work.Directional Travel Pedals
The farther the pedals are pushed down, the faster the travel speed.The brakes are applied automatically when the travel pedals are released. Reverse Direction Travel Pedal (1.) - Push down on the left pedal for reverse travel. The machine will always travel toward the sprockets. Forward Direction Travel Pedal (2.) - Push down on the right pedal for forward travel. The machine will always travel toward the idlers.Steering Control
The travel pedals must be used with the steering control lever to allow machine movement. Spot Left Turn (1.) - Move the lever all the way to the left to reverse the left track, allowing a quick left turn (counter rotation). Pivot Left Turn (2.) - Move the lever part way to the left to stop the left track, allowing the machine to turn gradually. Straight (3.) - Move the lever to this position to allow the machine to go straight in either direction. Pivot Right Turn (4.) - Move the lever part way to the right to stop the right track, allowing the machine to turn gradually. Spot Right Turn (5.) - Move the lever all the way to the right to reverse the right track, allowing a quick right turn (counter rotation).Hydraulic and Directional Lock Lever
Locked - Push the lever down and all hydraulic controls and the travel pedals are inoperable. Unlocked - Pull the lever up and all hydraulic controls and the travel pedals are operable.Swing Lock Pin
Engage the pin only when