2215188 SOLENOID AS Caterpillar parts
PF-300C, PS-300B
Rating:
Alternative (cross code) number:
CA2215188
221-5188
2215188
CA2215188
221-5188
2215188
Weight: 0.30 pounds 0 kg.
PNEUMATIC COMPACTOR,
Number on catalog scheme:
6
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9900 Hydraulic Cylinder Repair Stand 1
B(1) 6V-6080 Torque Multiplier 1
5S-6079 65 mm Socket 1
C 9U-7868 Spanner Wrench 1
123-3802 Adapter Plate 1
D 195-4609 Seal Pick 1
E 9U-6600 Hydraulic Pump 1
5P-4749 Puller Plate 1
5P-4776 Threaded Rod 1
9S-8536 Sleeve 1
5P-8713 Plate 1
9U-6833 Nut 1
6V-7047 Hydraulic Cylinder 1
(1) Use Tooling (B) if Tooling (A) is unavailable.Start By:
Remove the bucket cylinder. Refer to Disassembly and Assembly, "Bucket Cylinder - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00535143
Put the bucket cylinder in Tooling (A). The weight of the bucket cylinder is approximately 50 kg (110 lb).
Remove lock ring (18) from the head and cylinder assembly (8).
Use Tooling (C) and unscrew head (20) from cylinder assembly (8).
Use Tooling (A) to slide rod assembly (7) out of cylinder assembly (8).
Remove ring (3), O-ring seal (4), and ring (5) from piston (6).
Use Tooling (B) to remove locknut (2) that secures piston (6) to rod assembly (7). Remove the piston from the rod assembly.
Slide cylinder assembly (8) onto the rod assembly. Screw head (20) onto the cylinder assembly. Pull the cylinder assembly and head (20) as a unit away from the rod assembly. Remove the head from the cylinder assembly.
Use Tooling (D) to remove O-ring seal (19), O-ring seal (16), and ring (17) from the head. Remove lip seal (14), ring (13), seal (12), seal (11), ring (9), and bearing (10) from the head.
Remove lip seals (15). Use Tooling (E) to remove the bearing from the rod assembly.
Remove lip seals (1). Use Tooling (E) to remove the bearing from the cylinder assembly.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9900 Hydraulic Cylinder Repair Stand 1
B(1) 6V-6080 Torque Multiplier 1
5S-6079 65 mm Socket 1
C 9U-7868 Spanner Wrench 1
123-3802 Adapter Plate 1
D 195-4609 Seal Pick 1
E 9U-6600 Hydraulic Pump 1
5P-4749 Puller Plate 1
5P-4776 Threaded Rod 1
9S-8536 Sleeve 1
5P-8713 Plate 1
9U-6833 Nut 1
6V-7047 Hydraulic Cylinder 1
(1) Use Tooling (B) if Tooling (A) is unavailable.Start By:
Remove the bucket cylinder. Refer to Disassembly and Assembly, "Bucket Cylinder - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00535143
Put the bucket cylinder in Tooling (A). The weight of the bucket cylinder is approximately 50 kg (110 lb).
Remove lock ring (18) from the head and cylinder assembly (8).
Use Tooling (C) and unscrew head (20) from cylinder assembly (8).
Use Tooling (A) to slide rod assembly (7) out of cylinder assembly (8).
Remove ring (3), O-ring seal (4), and ring (5) from piston (6).
Use Tooling (B) to remove locknut (2) that secures piston (6) to rod assembly (7). Remove the piston from the rod assembly.
Slide cylinder assembly (8) onto the rod assembly. Screw head (20) onto the cylinder assembly. Pull the cylinder assembly and head (20) as a unit away from the rod assembly. Remove the head from the cylinder assembly.
Use Tooling (D) to remove O-ring seal (19), O-ring seal (16), and ring (17) from the head. Remove lip seal (14), ring (13), seal (12), seal (11), ring (9), and bearing (10) from the head.
Remove lip seals (15). Use Tooling (E) to remove the bearing from the rod assembly.
Remove lip seals (1). Use Tooling (E) to remove the bearing from the cylinder assembly.
Caterpillar parts catalog:
Parts solenoid Caterpillar catalog:
1250640
SOLENOID AS
PS-300B
PS-300B
1245368
SOLENOID
PF-300C, PS-300B
PF-300C, PS-300B
2525017
SOLENOID AS
CP-663E, CS-663E, CS-683E
CP-663E, CS-663E, CS-683E
2454601
SOLENOID
CB-214D, CB-214E
CB-214D, CB-214E
2028838
SOLENOID
CB-214D
CB-214D
1854748
SOLENOID
CB-214D
CB-214D
3793340
SOLENOID-VALVE
CP-573E, CS-563E, CS-573D, CS-583D, CS-583E
CP-573E, CS-563E, CS-573D, CS-583D, CS-583E
1793172
SOLENOID
PM-465, RM-350B
PM-465, RM-350B
2159636
SOLENOID
CB-634D
CB-634D
2513783
SOLENOID AS
CB-534D, CB-564D
CB-534D, CB-564D
CB-434D, CB-534D, CB-564D, CD-54
2157332
SOLENOID
CB-434D, CB-534D, CB-564D, CB-634D
CB-434D, CB-534D, CB-564D, CB-634D
2907920
SOLENOID
CB-534D, CB-564D, CD-54
CB-534D, CB-564D, CD-54
1958811
SOLENOID GP
CB-434D, CB-534D, CB-564D, CB-634D
CB-434D, CB-534D, CB-564D, CB-634D