2368932 SOLENOID Caterpillar parts
784C, 785C, 785D, 789C, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 980H, 980K, 980K HLG, 980M, 982M
Rating:
Alternative (cross code) number:
CA2368932
236-8932
2368932
CA2368932
236-8932
2368932
Weight: 0.70 pounds 0 kg.
TRACTOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$465.00
21 Nov 2019
-: -
Cat 236-8932 2368932 Solenoid Hood Tilt Genuine Oem Cat Caterpillar 980M 789C 982M
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 2368932:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00563997
Put lube oil on the bridge dowels and the bore of each bridge (3). Install the bridges in the original locations. Loosen the adjusting screws.
Use the following procedure in order to adjust the bridges:
Put clean oil in the lubrication passage of the bridge.
Back out the adjusting screw. Press straight down on the top contact surface of the bridge (3) with a force of 50 10 N (11 2 lb).
Turn the adjusting screw clockwise until the oil film in the lubrication passage of the bridge moves inward. This indicates that the adjusting screw has made contact with the valve stem.
Equalize the clearance with the dowel by turning the adjusting screw clockwise.
Hold the adjusting screw in this position. Tighten the locknut to a torque of 100 15 N m (74 11 lb ft).
Do this procedure for both bridges. Put lube oil on the top contact of both bridges.
Put clean engine oil on each end of the push rods (4). Install the push rods in the cam follower. Ensure that the push rods are installed in the original locations. Note: Do not tighten the rocker arm shaft bolts until the rocker arm adjustment screws are loosened. Bent valves can result if the valves contact the pistons.
Place the rocker arm assembly (2) on the rocker arm support. Ensure that the dowels are engaged.
Ensure that the sockets for the push rods are engaged with the ball screws on the rocker arms.
Loosen the adjusting screws (7) on the rocker arms.
Install the center push rod for the gas admission valve.
Tighten the bolts (1) that hold the rocker arm shaft to the rocker arm support. Note: While you tighten the rocker arm bolts, align the rocker arm assembly. This alignment will provide full surface contact between the rocker arm button (1) and the top of the bridge.
Adjust the valve clearance. Refer to the Testing And Adjusting, SENR5528, "Valve Clearance Adjustment" for additional information. End By:
Install the valve covers.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00563997
Put lube oil on the bridge dowels and the bore of each bridge (3). Install the bridges in the original locations. Loosen the adjusting screws.
Use the following procedure in order to adjust the bridges:
Put clean oil in the lubrication passage of the bridge.
Back out the adjusting screw. Press straight down on the top contact surface of the bridge (3) with a force of 50 10 N (11 2 lb).
Turn the adjusting screw clockwise until the oil film in the lubrication passage of the bridge moves inward. This indicates that the adjusting screw has made contact with the valve stem.
Equalize the clearance with the dowel by turning the adjusting screw clockwise.
Hold the adjusting screw in this position. Tighten the locknut to a torque of 100 15 N m (74 11 lb ft).
Do this procedure for both bridges. Put lube oil on the top contact of both bridges.
Put clean engine oil on each end of the push rods (4). Install the push rods in the cam follower. Ensure that the push rods are installed in the original locations. Note: Do not tighten the rocker arm shaft bolts until the rocker arm adjustment screws are loosened. Bent valves can result if the valves contact the pistons.
Place the rocker arm assembly (2) on the rocker arm support. Ensure that the dowels are engaged.
Ensure that the sockets for the push rods are engaged with the ball screws on the rocker arms.
Loosen the adjusting screws (7) on the rocker arms.
Install the center push rod for the gas admission valve.
Tighten the bolts (1) that hold the rocker arm shaft to the rocker arm support. Note: While you tighten the rocker arm bolts, align the rocker arm assembly. This alignment will provide full surface contact between the rocker arm button (1) and the top of the bridge.
Adjust the valve clearance. Refer to the Testing And Adjusting, SENR5528, "Valve Clearance Adjustment" for additional information. End By:
Install the valve covers.
Cat SIS web machinery list:
Parts solenoid Caterpillar catalog:
521B, 522B, 568 FM LL, 950G, 950G II, 962G, 962G II, 966G II, 972G II, 980G II, 980H
120G, 12G, 140G, 1673C, 215, 215B, 225, 227, 235, 235D, 245, 3208, 330 FM L, 3304, 3306, 3306B, 3406, 3406B, 3408, 3408B, 3408C, 3412, 3412C, 3508, 3512, 3516, 508, 5130, 518, 528, 561D, 572G, 589, 61...
1090, 1190, 120M, 1290T, 140G, 140M, 14H, 14M, 160M, 1673C, 16H NA, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590, 3176, 3176C, 3196, 3208, 3304, 3306, 330C, 330C L, 330D, 330D L, 336D, 336D L, 3406, 34...
1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H NA, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590, 2864C, 3126B, 3...
2729660
SOLENOID
795F AC, 795F XQ, 988K, AP1000E, AP1055E, BG1000E, BG1055E, HA771, HA871, M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, TK371, TK381
795F AC, 795F XQ, 988K, AP1000E, AP1055E, BG1000E, BG1055E, HA771, HA871, M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, TK371, TK381
365B, 365B II, 365B L, 385B, 385C L, 5090B, 621G, 623G, 627G, 657E, 69D, 725, 730, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785C, 789C, 793C, 797, 797B, 834G, 836G, 992G, AD45B, AD55, AD5...
2667599
SOLENOID
120M, 120M 2, 12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 623H, 623K, 623K LRC, 793F AC, 924K, 930K, 938K
120M, 120M 2, 12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 623H, 623K, 623K LRC, 793F AC, 924K, 930K, 938K
3712272
SOLENOID AS
776D, 777D, 777F, 777G, 793F AC, 793F-XQ, 795F AC
776D, 777D, 777F, 777G, 793F AC, 793F-XQ, 795F AC
1647140
SOLENOID
797
797
777G, 793F, 793F CMD, 793F OEM, 795F AC, 795F XQ
3895957
SOLENOID AS
795F AC
795F AC
1068754
SOLENOID AS
960F
960F
12H, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA, 970F, 980C, 980F, 980F II
8T8590
SOLENOID AS
992C, D9L
992C, D9L
854K, 988G, 988H, 988K, 990 II, 990H, 990K, 992G, 992K, 993K
1894389
SOLENOID
5110B, 988G, 990 II, 992G
5110B, 988G, 990 II, 992G
12H, 12H ES, 12H NA, 140G, 140H, 140H NA, 160H, 160H NA, 330 L, 330B, 936F
3712272
SOLENOID AS
776D, 777D, 777F, 777G, 793F AC, 793F-XQ, 795F AC
776D, 777D, 777F, 777G, 793F AC, 793F-XQ, 795F AC
1631535
SOLENOID
D250E, D350E, D400E
D250E, D350E, D400E
980G II
2860777
SOLENOID VALVE GROUP
950H, 966H
950H, 966H
980C, 988B, 992C
1V8229
SOLENOID
988B, 992C
988B, 992C