SOLENOID 2372322 - Caterpillar

Remove the cap from the top of the accumulator. Install Tool (B) on the accumulator valve.
Install chuck (5) onto Tool (B). If the chuck does not fit properly, use Tool (B) .Note: Do not connect the hose to valve (10). Make sure that valve (10) is closed.
Turn the valve on chuck (5) clockwise.
Use 16000 kPa (2321 psi) pressure gauge (7) to check the nitrogen charge in the accumulator.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment