SOLENOID AS 3E3574 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-7600     Slide Hammer Puller     1    
B     4C-8134     Seal Remover     1    Start By:
Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00524665
Use Tool (A) and Tool (B) to remove valve stem seal (1) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
C     4C-6366     Valve Guide Driver     1    
D     4C-6373     Valve Seal Installer     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00524649
Place the new valve stem seal in position on the valve guide.
Use Tool (C) and Tool (D) to install the new valve stem seal.End By: Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".