SOLENOID GP 7T1266 - Caterpillar

Illustration 1 g01362745
"Synchronize Service Hour Meters" screen"PLM Commands"
Illustration 2 g01362129
"PLM Commands" menu for Cat ET There are ten commands that can be completed by selecting "Service/PLM Commands" from the menu bar in Cat ET.Registration - This command automatically queues a registration message and an administration message. The registration message will queue up and wait for the next available satellite to complete the process. The parameters "Queued Registration Messages"and "Queued Administration Messages" in "Message Queue" will show a value of "1". When the registration message and administration messages has been successfully transmitted, the value will change back to "0". This registration process can take from 15 minutes to 1 hour. The time frame is dependent on the performance of the communications network.Note: Performing the registration process will activate the installed system. Complete the configuration process prior to performing the registration process.Note: To register Product Link, the Product Link antenna must have a clear view of the sky for detecting satellites. If the machine is inside a building or structure, the machine will need to be moved outside. The PL121SR radio yellow and orange LEDs should be solid to ensure that a lock has been established with the satellite. If the LED indicators cannot be observed, look in Cat ET at "Satellite Information" and "Satellite Communication Status" for satellite communication connection.De-registration - This command de-registers the Product Link before removing the unit for installation on another machine. This command will set all of the fields back to the default values. This command will clear the memory of the unit. All of the Fence settings and diagnostics in the memory are erased. After the message is "queued", the message should enter the Message Queue. This message can be viewed by observing "Message Queue" for the Product Link ECM. After the message has been transmitted, the unit can be removed. The unit can be reinstalled on another machine.Status Message - This command queues the following status descriptions: SMH, location and fuel.Fuel Report - This command queues a fuel report.Position Report - This command queues a position report."Time and Geo-Fencing Report" - This command queues a "Time and Geo-Fencing Report" report.SMH Report - This command queues a "SMH" report.Empty Message Queue - This command clears all messages out of the message queue. This command can be used to clear messages that are inadvertently added to the queue.ECM List - This command queues up an "ECM List Report" after a wait of a few minutes. The "ECM List Report" includes a list of all ECM modules. The list includes associated serial numbers, software part numbers, and sync-clock status detected by the Product Link that are connected to the Cat data-link. The "ECM List" is automatically sent at the time of registration. The "ECM List" contains a unique identifier for each ECM that is detected by the Cat data-linkAdministration Message - This command queues an administration message. This message contains data from the "Configuration"screen. The following examples are data examples: "PLM Report Configuration Parameters", "System Settings" and