AVSPARE.COM
parts catalog

SPACER 0003463 - Caterpillar



0003463 SPACER Caterpillar parts SPACER
Rating:
71
Alternative (cross code) number:
CA0003463
000-3463
0003463
Caterpillar 0003463 SPACER

Buy SPACER 0003463 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Water Pump Belt - Inspect/Adjust/Replace
Illustration 1 g01010940
Open the access door for the engine compartment on the left side of the machine.
Inspect the condition of the belt. If the belt is worn or damaged, replace the belt.
Illustration 2 g01010494
Use 144-0235 Belt Tension Gauge (3) in order to measure the belt tension. The belt tension for a used belt should be between 401 to 489 N (90 to 110 lb). A belt is considered used when the belt has been operating on a machine for at least 30 minutes.
If the tension for a used belt is not between 401 to 489 N (90 to 110 lb), loosen bolt (1) and (2) and adjust the pulley in order to obtain the correct belt tension.
After installing a new belt, adjust the pulley so that the tension is between 467 to 689 N (105 to 155 lb).
Run the machine for 30 minutes.
Use 144-0235 Belt Tension Gauge (3) in order to measure the belt tension. The belt tension should be between 401 to 489 N (90 to 110 lb). If the belt tension is not the correct value for a used belt, repeat Step 4.
Close the access door for the engine compartment on the left side of the machine.


Parts spacer Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.