SPACER 0817351 - Caterpillar

start by: a) remove engine 1. Remove the four bolts (1) that hold front bracket to the support.2. Loosen the bolts that hold the two caps for axle housing to the frame. 3. Disconnect clutch linkage from the lever (2). Loosen the bolt that holds lever to shaft. Remove lever (2) and key from shaft for yoke.4. Remove the tube assembly (3) from the transmission.5. Disconnect springs (4) from the cage. Remove the cage (5) for throwout bearing. Remove the input shaft.6. Use a punch and hammer to remove the bearing and thrust ring from cage (5). Remove the thrust ring from bearing. 7. Remove the two buttons (6) from the cage.8. Lift the front of transmission enough so shaft for the yoke can be removed. Use puller group (A) to remove plug from right side of housing that holds shaft for yoke in place.9. Remove the bolts that hold yoke to shaft. Slide the shaft through yoke and out of housing. Remove the keys from shaft. Remove the yoke. 10. Use tooling (B) to remove the bearings from housing.