SPACER 1047394 - Caterpillar

Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.Note: Lubricate O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g03717283
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install ball (14), spring (13), retainer (12), and retaining (11) into spool (9).
Illustration 2 g03717241
Install spool assembly (9), spring (8), piston (7), and O-ring seal (10).
Illustration 3 g03717219
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install cover (3) and bolts (6). Install screw (5) and O-ring seal (4).
Illustration 4 g03717212
Install cover (2) and bolts (1). End By:
Install the control manifold. Refer to Disassembly and Assembly, "Control Manifold - Install".