SPACER 1255894 - Caterpillar

Illustration 1 g03692900
Table 1
Specification for 399-3296 Conveyor Drive    
Item     Qty     Part     Specification Description    
1     -     -     Before assembly, apply Loctitte C5A Copper Anti-Seize between adjuster plate and frame mounts.    
2     2     417-2664 Auger Planetary Gp     Vent on the planetary should be on the top side of the housing.
Orientation of the motor mounting holes and the orientation of the planetary onto the adjuster plate.    
3     2     155-2937 Roller Chain     Set the chain tension with the following movement at the mid-position of the chain to
7 3 mm (0.3 0.1 inch).
1. Attach the gauge onto the mid-position of the chain in order to apply a force of
111 5 N (25 1 lb). Measure the deflection on the chain.
2. Apply
111 5 N (25 1 lb) of force on the rear of the chain and measure the deflection of the chain.
3. The measurement of both results must be within
7 3 mm (0.3 0.1 inch).    
Insert the pins from the inside of the machine into the master link and the offset link.
Illustration 2 g03692942
View of area A
Table 2
Item     Qty     Part     Specification Description    
4     4     2H-3906 Socket Setscrew     Before assembly, apply blue Loctitte 242 to the threads.    
5     6     7X-2576 Bolt     Torque to
410 25 N m (302 18 lb ft).    
6     2     103-3599 Sprocket     Align the planetary and the sprocket head shaft within 3mm.    
7     2     8T-4167 Hard Washer     As required, Use the hard washer between adjuster plate and frame pivot boss to align adjuster plate to frame mounting within 3mm.    
8     4     8T-4001 Nut     Torque to
410 25 N m (302 18 lb ft).    
9     2     152-0191 Bolt     Before assembly, apply Loctitte C5A Copper Anti-Seize to the threads.