AVSPARE.COM
parts catalog

SPACER 1400288 - Caterpillar



1400288 SPACER Caterpillar parts M318, M320 SPACER
Rating:
84
Alternative (cross code) number:
CA1400288
140-0288
1400288
Caterpillar 1400288 SPACER
Weight: 0.49 pounds 0 kg.
Information:
ID  82  mm
MATERIAL THICKNESS  6  mm
OD  115  mm

Buy SPACER 1400288 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEELED EXCAVATOR,

Compatible equipment models: 1400288:

WHEELED EXCAVATOR  M318   M320   Caterpillar
Number on catalog scheme: 10
 
  For full view, you need register

Information:

Machine Data That is Stored in the VIMSTM Electronic Control Modules
The VIMSTM electronic control modules (ECMs) store the following machine data:
Product identification number (PIN) or serial number
Machine equipment or unit number
Machine hours (SMH)
Odometer
Date
Time
Payload calibration
All data files that can be downloaded
Setting of the display unit
Setting of the desired language
Active eventsNote: See Table 1 for the status of machine information after new onboard software has been flashed into the onboard memory.Note: The active events are stored in memory when the keyswitch is turned off.
Table 1
Machine Information That is Changed By The Installation Of New VIMS Onboard Software
Machine Information Changed By Installation of New Onboard Software(1)
Serial Number of the Machine (Product Identification Number) NO
Equipment Number of the Machine (Unit Number) NO
Machine Hours (SMH) NO
Odometer NO
Date NO
Time NO
Payload Calibration YES
Configuration Type YES(2)
The Data Files That Are Available For Download YES
Event Data YES
Data Logger YES
Changes to the configuration that were made with the Service Program Codes. YES
Payload Data YES
Language Setting YES
Unit Setting YES
Active Event At The Time The Key Switch is Turned Off YES
(1) The VIMSTM onboard software (flash file) contains the source software and the configuration software. The Cat® Electronic Technician (Cat ET) must be used to flash this software.
(2) Installation of the new configuration software or the same configuration software clears the configuration type.The VIMS ECMs continuously monitor the status of the machine systems. The VIMS ECMs decisions are based upon the input from the following components:
Sensors
Switches
Other electronic control modules
Internal calculationsThe VIMS ECMs send information to other ECMs on the machine. The input and output of this information takes place over the Cat® data-link. The outputs of the VIMS ECMs notify the operator and service technician of the status of the machine systems. The machine system information that is provided by the VIMS is shown on the Advisor. The VIMS ECM provides the output for the service indicator lamp.The service indicator lamp is used by the service technician and the on-site maintenance personnel. The service indicator lamp is not visible from the cab. The VIMS ECMs use the two outputs of the RS-232 data-link to communicate the onboard data to the

Caterpillar parts catalog:

Caterpillar parts catalog
M320 Excavator 6WL00001-UP (MACHINE) POWERED BY 3116 Engine
M318 Excavator 6ES00001-UP (MACHINE) POWERED BY 3116 Engine
M320 Excavator 9PS00001-UP (MACHINE) POWERED BY 3116 Engine
M318 Excavator 8SS00001-UP (MACHINE) POWERED BY 3116 Engine


Parts spacer Caterpillar catalog:

1881871 SPACER
M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C, M325C MH
1902758 SPACER
M312, M315, M318, M320
1654351 SPACER
312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 319C, 963D
1605024 SPACER
312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 320B, 322B LN, 325B L, 330B L, 345B II, 345B L, 365B, 365B II, 365B L, 385B, 5090B
1454781 SPACER
312B L, 315B L, 317B LN, 318B, 320C, 325C, 325D, 330C, 330D L
1786866 SPACER
312B L, 312D, 315B L, 315C, 315D L, 317B LN, 318B, 318C, 319C, 319D, 319D L, 319D LN
1146195 SPACER
311B, 312B, 312B L, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 322B, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B L
0970832 SPACER
312B L, 318C, 320C, 325B L, 325C, 330B L, 330C, 345B II, 345B L, 824G, 824G II, 824H, 825G, 825G II, 825H, 933, 938G II, 938H, 939, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 98...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.