SPACER 1930337 - Caterpillar

335F Field Installed Tool Control Arrangement Hydraulics
1. Install the stick lines for your machine.
Determine the length of the stick in order to select the primary auxiliary lines group.
Determine the rotate lines, and the drain lines.2. Install the boom lines for your machine.
All attachments will require the Primary Auxiliary lines Group. Rotate is only required if a tool that requires a rotate function is installed.Note: Lines are stacked on top of each other so rotate lines cannot be installed without installing the primary auxiliary lines group first.3. Install the selected control group.
Select one control group or column depending on the tools you will be installing. Only one can be installed on a machine.
Table 1
Tool Control
449-9878 Tool Control Arrangement (- 01)
Qty Part No. Part Name Media
(1) 336-6360 Cab Wiring Gp Special Instruction, GEHS0179
(1) 354-4378 Pressure Sensor Gp Special Instruction, GEHS0164
(1) 372-3924 Control Valve Gp Special Instruction, GEHS0855
(1) 381-0033 Joystick Control Gp Special Instruction, GEHS0329
(1) 399-6416 Front Lines Gp Special Instruction, GEHS0856
(1) 399-6424 Pilot Lines Gp Special Instruction, GEHS0857
(1) 399-7513 Chassis Wiring Gp Special Instruction, GEHS0858
(1) 399-7514 Chassis Wiring Gp Special Instruction, GEHS0859
(1) 399-7516 Boom Wiring Gp Special Instruction, GEHS0860
(1) 451-5683 Pilot Lines Gp Special Instruction, GEHS0861
(1) 399-6406 Pilot Lines Gp Special Instruction, GEHS0927
(1) 462-1735 Pilot Lines Gp Special Instruction, GEHS0928
- 444-9174 Film -
Table 2
Standard Removal
Item Qty Part No. Part Name
(A) 1 399-6405 Pilot Lines Gp
(B) 1 399-6377 Pilot Lines Gp
Illustration 1 g06092661
View of the standard removal parts.
4. Install the connector lines group.
The connector lines make the final connection to the tool. Connector lines are specific to the work tool.5. Set the machine tool control system.
Reference: Excavator Tool Control System, KENR9698, "Testing and Adjusting Section", "Machine Tool Control System - Select"6. Set tool flows and pressures.
Reference: Excavator Tool Control System, KENR9698, "Testing and Adjusting Section", "Process for Setting Up the Work Tool"Serial Number Identification
Caterpillar Work Tools hydraulic kits are identified with serial numbers. The serial number is printed on a film group (1) . This film group should be placed on the right-hand window inside the cab.
Illustration 2 g03374483
(1) 444-9174 Film
Illustration 3 g03374485
(1) 444-9174 Film