SPACER 1990680 - Caterpillar

start by: a) remove bucket positioner1. Lift and block lift arms and bucket so the tilt cylinders are above the tires.2. Remove bolts (1) that hold tilt cylinder pins in position.3. Fasten a hoist to rod end of the left tilt cylinder. 4. Install tooling (A) and remove pin from rod end of left tilt cylinder.5. Fasten a hoist to rod end of the right tilt cylinder.6. Install tooling (B) and remove pin from the rod end of the right tilt cylinder. 7. Lower lift arms and bucket to floor. Install tooling (C) and remove pins from lift cylinders.8. Fasten a hoist to the cross support on the lift arms as a support. 9. Install tooling (D) and remove pins from frame. 10. Remove lift arms and bucket as a unit. Weight is 4010 lb. (1817 kg).Install Lift Arms And Bucket
1. Put lift arms and bucket into position on machine and install frame pins (1) with tool (B). 2. Install bolts (2) that hold frame pins into position. 3. Put lift cylinders into position and install pins (3) with tool (B).4. Install bolts that hold lift cylinder pins into position. 5. Lift the bucket and lift arms up and install the tilt cylinder pins (4) with tooling (A) and (B).6. Install bolts that hold the tilt cylinder pins into position.end by: a) install bucket positioner