SPACER 1P6704 - Caterpillar

Illustration 1 g02579936
Table 1
Specifications for 311-6038 Front Gear Gp
Item Qty Part Specification Description
1 8 281-2712 Washer Before assembly, lubricate both sides with clean engine oil.
2 4 279-0768 Bolt Torque to 190 30 N m (140 22 lb ft).
3 2 281-2711 Washer Before assembly, lubricate both sides with clean engine oil.
4 2 307-2402 Idler Gear As Bore in the 307-2403 Bushing after installation is 89.964 0.010 mm (3.5419 0.0004 inch).
Installation depth of the 307-2403 Bushing is 2.3 0.5 mm (0.09 0.02 inch).
5 1 348-7075 Oil Pump Adapter Bore in the 348-7074 Bushing after installation is 75.023 mm (2.9537 inch).
Installation depth of the 348-7074 Bushing is 0.5 0.5 mm (0.02 0.02 inch).
6 1 348-7079 Oil Pump Adapter Bore in the 348-7074 Bushing after installation is 75.035 mm (2.9541 inch).
Installation depth of the 348-7074 Bushing is 4.0 0.2 mm (0.16 0.01 inch).
7 2 5P-8119 O-Ring Seal Lubricate the bore of the O-ring seals lightly with the lubricant that is being sealed.
8 1 348-7076 Front Adapter As Bore in the 348-7074 Bushing after installation is 75.035 mm (2.9541 inch).
Installation depth of the 348-7074 Bushing is 3.6 0.5 mm (0.14 0.02 inch).
9 4 259-4598 O-Ring Seal Lubricate the bore of the O-ring seals lightly with the lubricant that is being sealed.
10 2 277-6911 Idler Shaft Diameter is 89.88 0.02 mm (3.539 0.001 inch).
11 2 165-4852 O-Ring Seal Lubricate the bore of the O-ring seals lightly with the lubricant that is being sealed.
12 4 281-3114 Bolt Torque to 190 30 N m (140 22 lb ft).
13 1 331-3656 Pump Drive Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
14 1 291-1998 Pump Adapter Bore in the 318-4810 Bushing of the pump adapter after installation is 94.056 mm (3.7030 inch).