SPACER-FAN 2666230 - Caterpillar

Illustration 1 g03330747
Right side view of engine
Table 1
Specification for 277-7261 Cylinder Block Gp and 425-3527 Cylinder Block Gp
Item Qty Part Specification Description
1 2 1W-8407 Sleeve Extension of sleeve from the top deck of the cylinder block is 14.0 0.5 mm (0.55 0.02 inch).
2 2 6V-3538 Dowel Extension of the new dowel is 8.0 0.5 mm (0.31 0.02 inch).
3 2 7N-5683 Dowel Extension of the new dowel is 12.0 0.5 mm (0.47 0.02 inch).
4 4 4F-5695 Cup Plug Before assembly, apply high temperature anaerobic flange sealant to the bores for the cup plug before assembly.
B - - Installation depth for the cup plug (4) is 1.25 0.25 mm (0.049 0.010 inch).
Illustration 2 g03330748
Front view
Table 2
Item Qty Part Specification Description
5 6 167-0024 Liner Seal Before assembly, apply 5P-3975 Rubber Lubricant to the liner seal, and immediately install the cylinder liner into the cylinder block.
6 2 0L-1026 Cup Plug Before assembly, apply high temperature anaerobic flange sealant to the bores for the cup plug at both the ends.
7 2 3B-0623 Cup Plug Before assembly, apply high temperature anaerobic flange sealant to the bores of the cup plug at both the ends.
E - - Installation depth for the cup plug (7) is 1.25 0.25 mm (0.049 0.010 inch).
F - - Installation depth for the cup plug (6) is 1.25 0.25 mm (0.049 0.010 inch).
Illustration 3 g03330749
Rear view
Table 3
Item Qty Part Specification Description
8 1 0S-0519 Cup Plug Before assembly, apply high temperature anaerobic flange sealant to the bores for the cup plug at both the ends.
H - - Installation depth for the cup plug (8) is 1.25 0.25 mm (0.049 0.010 inch).
Illustration 4 g03330750
Table 4
Item Qty Part Specification Description
J - - Before installation, bore in the cylinder block for the new cylinder is 123.59 0.15 mm (4.866 0.006 inch).
K - - New dimension from centerline of the crankshaft bore to the top surface of the cylinder block is 361.5 mm (14.23 inch).
L 7