SPACER 2W7954 - Caterpillar

Illustration 1 g03279276
Table 1
Specification for 237-1263 Bucket Linkage Gp
Item Qty Part Specification Description
1 4 235-7679 Lip Type Seal Lubricate the sealing lip of lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss.
2 2 248-7835 Bushing(1) Bore before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.73 0.20 mm (0.383 0.008 inch).
3 1 248-7820 Pin Diameter is 69.85 0.04 mm (2.750 0.002 inch).
4 1 451-2183 Nut Position the nut (5) to the distance of 0.0 1.0 mm (0.00 0.04 inch) past the end of the bolt. For locking, tighten the nut (5) against the nut (4).
Torque to 175 30 N m (129 22 lb ft).
5 1 451-2183 Nut
6 1 210-2957 Pin During assembly of linkage group on the machine, rotate the pin to position the red paint on the opposite of the link.
7 2 086-0523 Pin Diameter is 64.77 0.03 mm (2.550 0.001 inch).
8 2 248-7836 Lip Type Seal Lubricate the sealing lip of lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss.
9 2 229-1092 Bushing(1) Bore before assembly is 65.19 0.04 mm (2.567 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
10 1 331-2025 Lifting Hook Gp During assembly of linkage group on the machine, rotate the lifting hook group to position the grease fitting on the side of the bucket.
11 2 096-4876 Nut Torque to 105 20 N m (77 15 lb ft).
12 1 7I-6843 Pin Diameter is 59.86 0.03 mm (2.357 0.001 inch).
(1) Assemble the bushing so that the identification faces the outside.