SPACER 3D6651 - Caterpillar

"Sort By Type"
The "Sort By Type" menu allows the user to view the parameters that are associated with different components. Use the appropriate up arrow button or the down arrow button to highlight the "Sort By Type" menu. Press the "OK" button. A list of the types of parameters is displayed. Use the up arrow button and the down arrow button and press the "OK" button to select the desired type. The following types of parameters can be chosen:
Fluid Levels
Fuel Monitoring
Machine Status
Operator Inputs
Pressures
Speeds
Temperatures
Tire Monitoring
Totals - Lifetime
Totals - Reset
InstallationSettings Menu
Illustration 12 g02709905
"Settings" menuThe "Settings" menu allows the user to view and to adjust parameters for the following:
"Display Setup"
"Brake"
"Chassis"
"Machine"
"Transmission"
"VIMS"Operating conditions, preferences of the operator and requirements for operating efficiency determine the need to adjust the parameters. Parameters that are displayed are determined by the configuration and the options on the machine. The options on the machine can determine the software versions that are contained in the Electronic Control Modules (ECM). The Advisor menu display may change according to the software versions that are used for the ECM on the machine.Note: Caterpillar Electronic Technician (Cat ET) may also be used in order to change settings.
Illustration 13 g02175803
Select "Settings" from the screen.The "Settings" menu option is entered by selecting "Settings" from the Home menu. Press the up arrow button or the down arrow button until "Settings" is highlighted in order to select the "Settings" menu. Then press the "OK" button. Refer to Illustration 13.Note: The Home menu can be displayed from any screen by pressing the Home button. The following screen will now be displayed.
Illustration 14 g02710013
The "Settings" screenThe "Settings" menu organizes the parameters into six categories. These categories have adjustable parameters. The menu options are displayed on the left half of the screen, and the information is displayed on the right half of the screen.To adjust the associated parameters, the Advisor must be placed in the Service mode. Refer to the Systems Operation, KENR9023, "Service Mode" section of this manual for more information. Press the up arrow button or the down arrow button until the desired parameter is highlighted. Then press the "OK" button in order to access the parameter. Follow the instructions on the screen in order to adjust the parameter. "Display Setup"
From the "Display Setup" menu, use the appropriate up arrow button or the down arrow button to highlight the desired parameter. Then press the "OK" button to have