SPACER 3K5620 - Caterpillar

Illustration 14 g01732840
Attaching a new step to a PM (15) Check box (16) "Save" button
Once you have added all desired steps and parts, click the "Save" button (16) . The "Higher PM details" window will be displayed.
The new steps you added will be added to the planned maintenance that you selected from the drop-down menu, but you can also add these steps to other PMs. Select the check box (15) next to all of the PMs to which you wish to add the new steps.
Click the "Save" button. The new steps are added to the planned maintenance.
Illustration 15 g01250153
Confirmation message for no additional PM's being attachedNote: If you did not select any additional PMs to add the step to, the confirmation window in Illustration 15 will appear. Click the "OK" button."Customize PM Schedule"
You can customize the interval at which planned maintenances are scheduled. PM schedule intervals can be hour based or date based. You can also apply an offset to the schedule if desired (default is no offset applied). Each interval and its description follows: "Hour based" - Interval schedule based on hour (SMU) accumulation of the equipment."Date based" - Interval schedule based on calendar days."Offset" - Next scheduled service calculated from previous service details. If offset is not applied (default), the schedule will ignore previous service details and adhere to fixed" PM Intervals".Configuring Equipment for Hour Based PM Scheduling
In order to configure equipment for hour based PM scheduling, use the following procedure:
From either the "Administration" screen or the "View" drop-down menu, select "Customize PM Schedule".If you have equipment already selected, the "Customize PM Schedule - Select Equipment" screen will be displayed.If you have not already selected equipment, complete the "Equipment Search" fields and click "Display Equipment" before proceeding to the next step.
Illustration 16 g01732841
"Customize PM Schedule - Select Equipment" (1) Radio buttons (2) "Customize" button
Select the radio button (1) next to the piece of equipment you wish to configure for hour based scheduling.
Click the "Customize" button (2) . The "Customize PM Schedule" screen will be displayed.
Illustration 17 g01732842
"Hour Based PM Scheduling" (17) "Follow Offset" check box (18) "Select a PM Schedule type" drop-down menu (19) "Save" button
If not already selected, select "Hour Based Scheduling" from the "Select a PM Schedule type" drop-down menu (18) .
In order for the PM Schedule to follow offset, select the "Follow Offset" check box (17) .Note: If you select Follow Offset, the next planned maintenance will be scheduled at the interval starting from when the last planned maintenance was performed. For example, if a planned maintenance is scheduled for every 500 SMUs and the first PM is performed after 600 SMUs, the next PM will be scheduled for 1100 SMUs rather than 1000.If you do not select Follow Offset, the next planned maintenance will be scheduled at a fixed interval. For example, if the PM is scheduled for every 500 SMUs and the first PM is performed after 600 SMUs, the next PM will still be scheduled for 1000 SMUs.
Click the "Save" button (19) . The