SPACER 4Z8660 - Caterpillar

Articulated Truck:
735 (S/N: B1N1-UP; AWR1-UP)
735B (S/N: L4D1-UP; T4P1-UP)
740 (S/N: AXM1-UP; B1P1-UP)
740 EJECTOR (S/N: B1R1-UP; AZZ1-UP)
740B (S/N: L4E1-UP; T4R1-UP)
740B EJECTOR (S/N: L4F1-UP; T4S1-UP)
D350ESeries II (S/N: 2XW1-UP)
D400ESeries II (S/N: APF1-UP; 8PS1-UP)
A new 433-7514 Pump Gp replaces the discontinued 140-0087 Pump Gp and 188-4455 Pump Gp on the above listed articulated trucks. The 433-7514 Pump Gp is not a direct replacement for 140-0087 Pump Gp and 188-4455 Pump Gp .The main differences are:
Overall length of the pump is 12 mm (0.5 inch) larger than the discontinued pump
Inlet (suction) port has moved rearward by 17 mm (0.67 inch)
Outlet (discharge) port has moved rearward by 38 mm (1.5 inch) Additional parts are required to support the installation of 433-7514 Pump Gp. The new parts are in addition to the normal seals and gaskets (which are unchanged) and the new parts are different depending on the particular model of articulated truck that the pump is being installed on. Refer to the Special Instruction referenced above for additional parts and installation information.Note: The 433-7514 Pump Gp was not installed on any of the above listed models of Articulated Trucks direct from the factory. The 433-7514 Pump Gp is a service replacement part only.Note: Refer to Special Instructions, SEHS0284, "Procedure to Replace Noncurrent Gear Pumps on Certain Articulated Trucks" for more information on installing pumps on certain Articulated Trucks.