SPACER 5L3325 - Caterpillar

Improper Connections for Jump Start Cables (10)Safety Message (10) is in the battery compartment.
Illustration 13 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Staring with Jump Start Cables".Do Not Operate (11)Safety Message (11) is positioned in the cab beneath the left window.
Illustration 14 g01055734
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Product Link (12) (if equipped)Safety message (12) is located in the right side of the cab on the rear support.
Illustration 15 g01108685
This machine is equipped with a Caterpillar Product Link communication device which should be deactivated in or near a blast site in compliance with applicable legal requirements. Failure to do so could cause interference with blasting operations resulting in serious injury or death.
Refer to Special Instruction, REHS1642, "Operation of the Product Link System" for additional information.Falling Hazard (13) (If Equipped)Safety message (13) is on the rear of the Accugrade mast at eye level.
Illustration 16 g01108716
To prevent possible personal injury during installation and removal of the laser receivers, lower the mast to the minimum height and use an approved access system to reach the mounting locations of the laser receivers at the top of the mast. Do not climb on the blade.
Do Not Weld On the ROPS (14)Safety Message (14) is positioned on the outside, upper portion of the cab.
Illustration 17 g01955348
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Do Not Operate (15)Safety message (15) is on the right side frame of the towing winch.
Illustration 18 g01055734
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.