SPACER .91MM(.036IN)THK 5S7001 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
5/8 - 18 NF by 7 inch 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01077686
Remove two bolts (1). Install Tooling (A).
Remove remaining bolts (1). Remove plate (3). Remove vibration damper (4) from adapter (5) and pulley (2).
Remove pulley (2) and adapter (5) from the crankshaft.
Remove Tooling (A) from the crankshaft. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
5/8 - 18 NF by 7 inch 2
B 4C-5593 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly inspect the viscous damper for signs of leakage or for signs of a dented (damaged) case. Either of these conditions can cause the weight to make contact with the case. This can affect the viscous damper's operation.
Illustration 2 g01077686
Install Tooling (A) in the crankshaft.
Install adapter (5) and pulley (2) on Tooling (A).
Install vibration damper (4) on Tooling (A).
Install plate (3) on Tooling (A).
Apply Tooling (B) to bolts (1). Install bolts (1). Remove Tooling (A) and install remaining bolts (1).