SPACER 5S7018 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     M20 x 2.5 by 150 mm
Guide Stud     2    
B     138-7573     Link Bracket     2    
C     1U-9200     Lever Puller Hoist     1    
Illustration 1 g01356987
Illustration 2 g01356986
Attach a suitable lifting device, Tooling (B) , and Tooling (C) to the final drive and wheel (3) . The weight of the final drive and wheel (2) is approximately 197 kg (435 lb). Position the final drive and wheel (3) and slide the final drive and wheel (3) onto Tooling (A) .
Illustration 3 g01356985
Remove Tooling (B) and Tooling (C) . Install bolts (1) . Remove Tooling (A) . Bolts (2) were previously installed. Tighten bolts (1) to a torque of 570 80 N m (420 59 lb ft).End By:
Fill the oil for the differential and final drive. Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil - Change".
Install the front tire and rim. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install" or refer to Disassembly and Assembly, "Tire and Rim (Rear) - Remove and Install".