SPACER 5T1352 - Caterpillar

Illustration 6 g03723310
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install washer (50), spring (49), and washer (48) into barrel (44).
Use Tooling (A) and a suitable press to install retaining ring (47) into barrel (44).
Illustration 7 g03723296
Install pins (46) into barrel (44).
Illustration 8 g03723275
Install retainer (45) onto barrel (44).
Illustration 9 g03723278
Install pistons (42) into plate (43).
Illustration 10 g03723269
Install plate (43) and pistons (42) into barrel (44).
Illustration 11 g03723254
Install barrel assembly (41) into housing (3).
Illustration 12 g03723251
Install O-ring seal (40) and bearing cone (39) into housing (3).
Illustration 13 g03722859
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install spool (37) and plug assembly (38) into control valve (6).
Install plug assemblies (36), (35), and (34) into control valve (6).
Install poppet (33), spring (32), spring (31), O-ring seal (30), and plug assembly (29) into control valve (6).
Install spool (27), plug assembly (28), and plug assembly (26) into control valve (6).
Install plug assembly (25), poppet (24), and springs (23) and (22) into control valve (6).
Install O-ring seal (21), O-ring seal (20), and plug assembly (19).
Illustration 14 g03723113
Illustration 15 g03723103
Install O-ring seal (15), backup ring (14), O-ring seal (13), and backup ring (12) onto valve (16).
Install valve (16), coil (17), and nut (18) onto control valve (6).
Install O-ring seals (11) onto control valve (6).
Illustration 16 g03722844
Install control valve (6) and bolts (7) onto head (1).
install bearing cup (10) onto head (1).
Install port plate (8) onto head (1).
Install O-ring seal (9) and O-ring seal (5) onto head (1).
Install piston kit (4) onto head (1).
Illustration 17 g03722837
Install head (1) and bolts (2) onto housing (3). End By:
Install the piston pump (auxiliary).