6D6184 SPACER Caterpillar parts
14E
Rating:
Alternative (cross code) number:
CA6D6184
6D-6184
6D6184
CA6D6184
6D-6184
6D6184
Weight: 0.25 pounds 0 kg.
Information:
ID
51.587
mm
MATERIAL THICKNESS
5.08
mm
OD
82.55
mm
MOTOR GRADER,
Compatible equipment models: 6D6184:
Number on catalog scheme:
42
For full view, you need register
Information:
Specifications
Illustration 1 g02775844
Table 1
Specification for 354-0303 Control Manifold Gp
Item Qty Part Specification Description
1 3 Nut Torque nut to
4.1 N m (3 lb ft). Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.Note: Lubricate O-rings and seals with lubricant used while in operation.
Illustration 2 g03387937
Install four fittings (6) into control manifold (3) .
Illustration 3 g03387934
Illustration 4 g03387932
Note: Three O-rings (5) are located on each valve cartridge (4) .
Install three valve cartridges (4) into control manifold (3) .
Illustration 5 g03387931
Install solenoids (2) on valve cartridges (4). Install cartridge nuts (1) .
Tighten cartridge nuts (1) to a torque of 4.1 N m (3 lb ft).End By: Install the control manifold.
Illustration 1 g02775844
Table 1
Specification for 354-0303 Control Manifold Gp
Item Qty Part Specification Description
1 3 Nut Torque nut to
4.1 N m (3 lb ft). Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.Note: Lubricate O-rings and seals with lubricant used while in operation.
Illustration 2 g03387937
Install four fittings (6) into control manifold (3) .
Illustration 3 g03387934
Illustration 4 g03387932
Note: Three O-rings (5) are located on each valve cartridge (4) .
Install three valve cartridges (4) into control manifold (3) .
Illustration 5 g03387931
Install solenoids (2) on valve cartridges (4). Install cartridge nuts (1) .
Tighten cartridge nuts (1) to a torque of 4.1 N m (3 lb ft).End By: Install the control manifold.
Caterpillar parts catalog:
Parts spacer Caterpillar catalog:
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H NA,...
1090, 1190, 1190T, 120G, 120M 2, 1290T, 12F, 12M 2, 130G, 140B, 140M 2, 14E, 160M 2, 1673C, 16G, 215, 235, 235B, 235C, 245, 3145, 3150, 3160, 3176B, 3176C, 3196, 3208, 330, 330 FM L, 330 L, 3304, 3304...
120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12F, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163, 163H, 163H NA,...
120B, 120G, 12F, 12G, 130G, 140, 140G, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
6D3989
SPACER (.105" Thick)
12F, 14E
12F, 14E
6D3988
SPACER (.110" Thick)
12F, 14E
12F, 14E
6D3987
SPACER (.115" Thick)
12F, 14E
12F, 14E
7D5559
SPACER
12F, 14E
12F, 14E
6D5451
SPACER
14E, 16
14E, 16
4D2188
SPACER
12E, 12F, 14E
12E, 12F, 14E