SPACER 6V2762 - Caterpillar

Oil Filter Differential Pressure
The ECM automatically warns the operator of high oil filter differential pressure. The default settings that are programmed at the factory are listed in Table 8.
Table 9
Oil Filter Differential Pressure
Parameter Default Setting
Warning setpoint 105 kPa (15 psi)
Warning delay 5 seconds
Hysteresis 10 kPa (1.5 psi)
Security level No required password If the oil filter differential pressure is above 105 kPa (15 psi) for five seconds, a warning will occur. To deactivate the warning, the oil filter differential pressure must be below 95 kPa (13.5 psi).Fuel Filter Differential Pressure
The ECM automatically warns the operator of high fuel filter differential pressure. The default settings that are programmed at the factory are listed in Table 10.
Table 10
Fuel Filter Differential Pressure
Parameter Default Setting
Warning setpoint 70 kPa (10 psi)
Warning delay 5 seconds
Hysteresis 10 kPa (1.5 psi)
Security level No required password If the fuel filter differential pressure is above 70 kPa (10 psi) for five seconds, a warning will occur. To deactivate the warning, the fuel filter differential pressure must be below 60 kPa (8.7 psi).Crankcase Pressure
The ECM will automatically perform the following functions if high crankcase pressure occurs:
Warning
Derating
Shut downThe default settings that are programmed at the factory are listed in Table 11.
Table 11
Crankcase Pressure
Parameter Default Setting
Warning setpoint 2 kPa (.3 psi)
Warning delay 3 seconds
Derate setpoint 6 kPa (.9 psi)
Derate delay 10 seconds
Maximum time of derating 480 seconds
Hysteresis 0.25 kPa (.036 psi)
Security level Required