6Y0847 SPACER Caterpillar parts
320B, 322 FM L, 322B L, 325, 325 L, 325 LN, 325B, 325B L, 330C, 330D, 336D L, 336D LN, OEMS
Rating:
Alternative (cross code) number:
CA6Y0847
6Y-0847
6Y0847
CA6Y0847
6Y-0847
6Y0847
Weight: 0.25 pounds 0 kg.
Information:
ID
42.6
mm
MATERIAL THICKNESS
9.2
mm
OD
64
mm
EXCAVATOR, UNDERCARRIAGE,
Compatible equipment models: 6Y0847:
Number on catalog scheme:
7
For full view, you need register
Information:
Rear View Camera (If Equipped)
The rear view camera system consists of a camera that is located in the middle of the top of the counterweight and a "VIDEO MODE SETTING" menu on the monitor.Note: The rear view camera system has been set up by the factory or by a Caterpillar dealer in order to provide views which comply with specified guidelines. Consult your Caterpillar dealer before any adjustments are made to the system.For more information refer to Operation and Maintenance Manual, "Monitoring System".Side View Camera (If Equipped)
The side view camera system consists of a camera that is located on the top of the fuel tank and a "VIDEO MODE SETTING" menu on the monitor.Note: The side view camera system has been set up by the factory or by a Cat dealer in order to provide views which comply with specified machine right side view. Consult your Cat dealer before any adjustments are made to the system.For more information refer to Operation and Maintenance Manual, "Monitoring System".Work Area Vision System (WAVS) (If Equipped)
Operation
WAVS is a closed circuit video monitoring system. WAVS consists of a 178 mm (7 inch) LCD display and a camera. The display is mounted in the machine cab.Power is supplied to the system when the operator turns the engine start switch to the ON position. The power On/Off button that is on the display is disabled.The camera lens and the display screen will require periodic cleaning. Cleaning instructions for the camera lens and the display are described in the Maintenance section.Automatic Mode
The single camera system is only available with the automatic mode. The single camera system can be placed in "Standby".Note: If the single camera system can be placed in manual mode, notify service personnel.WAVS will automatically display the camera view which is based on current machine operation and the configuration of WAVS. For example, WAVS may be configured to display a side view from a side-mounted camera.Camera
Illustration 1 g01223051
WAVS camera
The orientation of the camera is set during installation. After installation, there should be no need to make any physical adjustments to any of the cameras under normal operating conditions. WAVS uses a fixed-focused camera that has been installed at the factory, a Caterpillar dealer, or a qualified technician.Display
Keypad
Illustration 2 g01291176
(A) Camera Selection Button (multiple cameras only)
(B) Automatic Brightness
(C) Standby Function
(D) Contrast Button
(E) Brightness Button
(F) Decrease Adjustment Button
(G) Increase Adjustment Button
(H) Power Button (disabled)
(I) Camera Select LED Lights (multiple cameras only)
(J) Button Status LED Lights
(K) Light SensorAdjustment
The following selections for the WAVS display can be changed by the operator.
Table 1
Display Button Operation for single camera system
Operation Procedure Notes
Brightness Adjustment Press button (E) in order to enable the "Brightness Adjustment". Then press either button (F) or (G) in order to adjust the brightness. Press any other display button in order to exit brightness adjustment mode.
Contrast Adjustment Press button (D) in order to enable the Contrast Adjustment. Then press either button (6) or (7) in order to adjust the contrast level. Press any other display button in order to
The rear view camera system consists of a camera that is located in the middle of the top of the counterweight and a "VIDEO MODE SETTING" menu on the monitor.Note: The rear view camera system has been set up by the factory or by a Caterpillar dealer in order to provide views which comply with specified guidelines. Consult your Caterpillar dealer before any adjustments are made to the system.For more information refer to Operation and Maintenance Manual, "Monitoring System".Side View Camera (If Equipped)
The side view camera system consists of a camera that is located on the top of the fuel tank and a "VIDEO MODE SETTING" menu on the monitor.Note: The side view camera system has been set up by the factory or by a Cat dealer in order to provide views which comply with specified machine right side view. Consult your Cat dealer before any adjustments are made to the system.For more information refer to Operation and Maintenance Manual, "Monitoring System".Work Area Vision System (WAVS) (If Equipped)
Operation
WAVS is a closed circuit video monitoring system. WAVS consists of a 178 mm (7 inch) LCD display and a camera. The display is mounted in the machine cab.Power is supplied to the system when the operator turns the engine start switch to the ON position. The power On/Off button that is on the display is disabled.The camera lens and the display screen will require periodic cleaning. Cleaning instructions for the camera lens and the display are described in the Maintenance section.Automatic Mode
The single camera system is only available with the automatic mode. The single camera system can be placed in "Standby".Note: If the single camera system can be placed in manual mode, notify service personnel.WAVS will automatically display the camera view which is based on current machine operation and the configuration of WAVS. For example, WAVS may be configured to display a side view from a side-mounted camera.Camera
Illustration 1 g01223051
WAVS camera
The orientation of the camera is set during installation. After installation, there should be no need to make any physical adjustments to any of the cameras under normal operating conditions. WAVS uses a fixed-focused camera that has been installed at the factory, a Caterpillar dealer, or a qualified technician.Display
Keypad
Illustration 2 g01291176
(A) Camera Selection Button (multiple cameras only)
(B) Automatic Brightness
(C) Standby Function
(D) Contrast Button
(E) Brightness Button
(F) Decrease Adjustment Button
(G) Increase Adjustment Button
(H) Power Button (disabled)
(I) Camera Select LED Lights (multiple cameras only)
(J) Button Status LED Lights
(K) Light SensorAdjustment
The following selections for the WAVS display can be changed by the operator.
Table 1
Display Button Operation for single camera system
Operation Procedure Notes
Brightness Adjustment Press button (E) in order to enable the "Brightness Adjustment". Then press either button (F) or (G) in order to adjust the brightness. Press any other display button in order to exit brightness adjustment mode.
Contrast Adjustment Press button (D) in order to enable the Contrast Adjustment. Then press either button (6) or (7) in order to adjust the contrast level. Press any other display button in order to
Caterpillar parts catalog:
Parts spacer Caterpillar catalog:
215B, 225, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 539, E300B, M325B
330, 330 FM L, 330 L, 330C, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, 365B, 36...
322, 322 FM L, 322 LN, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, 350, 375, 375 L, 5080, E240C, E300B, EL240B, M325B, TK1051, W330B
322, 322 FM L, 322 LN, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, 350, 375, 375 L, 5080, E240C, E300B, EL240B, M325B, TK1051, W330B
330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 385B, 385C, 3...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320C, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E LN, 325, 325 FM L, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C ...
322 FM L, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 34...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C...
324D, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345...
320 L, 320B, 320B L, 320N, 345B, 345B L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
9U3465
SPACER
322B L, 325 L, 325B L, OEMS
322B L, 325 L, 325B L, OEMS
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
4I7408
SPACER-FAN
322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 325, 325 LN, 325B, 325B L, M325B
322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 325, 325 LN, 325B, 325B L, M325B
1297337
SPACER
515, 525
515, 525
1297334
SPACER
515, 525
515, 525
1297293
SPACER
515, 525, 525C, 535C, 545C
515, 525, 525C, 535C, 545C
1355734
SPACER-FAN
322B LN, 325B L
322B LN, 325B L
1970732
SPACER
322B L
322B L
320 L, 320B, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
0874761
SPACER
320B, 320B U, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B L
320B, 320B U, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B L
1232444
SPACER-SPECIAL
320B, 320B FM LL, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
320B, 320B FM LL, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
0874744
SPACER-SPRING
320 L, 320B, 320B U, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L
320 L, 320B, 320B U, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L