SPACER 7C8246 - Caterpillar

The FT530 Puller has been redesigned (changed) to include the operations of the FT531 and FT532 Pullers. The FT530, FT531 and FT532 Pullers were used to remove the transmission input flange from track-type tractor transmissions and engine crankshaft pulleys from motor graders. By the addition of several holes to the FT530 Puller, it can now do the work of all three pullers. The FT530 Puller is a dealer fabricated tool. Blueprints are available from your Division Service Manager. Earlier FT530 Pullers can be changed to the new design, by the addition of four .440" (11.18 mm) holes and four .531" (13.49 mm) holes (see the Illustration). The FT531 and FT532 Pullers have been canceled.
FT530 Puller.The FT530 Puller can be used to remove the transmission input flange from the machines shown in the chart that follows:
The FT530 Puller can also be used to remove the crankshaft pulleys on 3304 and 3306 Engines used in 120G, 130G, 140G, 12G, and 14G Motor Graders.