SPACER 7N2597 - Caterpillar

All SR5 generators have the same basic design. The following list explains some of the differences that may occur between SR5 generators:
Power for the exciter field is provided by the "Permanent Magnet Pilot Excited" (PMPE) method.
The location of the bearing can be on either side of the exciter, that is, the bearing can be located on the side of the exciter that is toward the input end of the rotor shaft or the bearing can be located on the side of the exciter that is toward the output end of the rotor shaft. The following factors determine the location of the bearing: vibration characteristics of the engine, vibration characteristics of the generator, the size of the engine and the size of the generator.
On PMPE generators, the pilot exciter will be outboard.
Power for the exciter may be provided by the "Internal Excitation" (IE). IE is provided by a set of unique coils that are installed in the main stator.Note: the input end of the generator is defined as the end of the generator that is connected to the engine. The output end of the generator is defined as the end of the generator where the diodes and PMG are located.
Illustration 1 g01231224
(1) (PMG) Magnet
(2) PMG Stator
(3) Bearing
(4) Rectifier Assembly
(5) Exciter Rotor
(6) Center Post Bus Bar
(7) Exciter Stator
(8) Flying Leads - Medium Voltage
(9) Main Rotor Assembly
(10) Main Stator Assembly
(11) Fan
(12) Coupling
Illustration 2 g01231230
(16) PMG Magnet
(17) PMG Stator
(18) Rectifier Assembly Location
(19) Exciter Rotor
(20) Exciter Stator
(21) Bearing
(22) Main Stator
(23) Main Rotor
(24) Rotor Shaft
(25) Fan
(26) Coupling
Illustration 3 g01320805
1600 Frame One Bearing PMG Equipped Generator
Illustration 4 g01232080
(31) Rectifier Assembly
(32) PMG Magnet
(33) PMG Stator
(34) Exciter Rotor
(35) Exciter Stator
(36) Bearing with a Sleeve
(37) Main Field (Stator)
(38) Main Rotor
(39) Rotor Shaft
(40) Fan
Illustration 5 g01232159
1600 Frame Two Bearing PMG Generator
(51) PMG Magnet
(52) PMG Stator
(53) Rectifier Assembly
(54) Exciter Rotor
(55) Exciter Stator
(56) Bearing
(57) Main Stator
(58) Main Rotor
(59) Rotor Shaft
(60) Fan
(61) Bearing
(62) Hub
Illustration 6 g01233108
1600 Frame One Bearing Internal Excitation (IE) Generator
Refer to Illustration 3 for Exploded View of Rectifier Assembly Location
(65) Sleeve
(66) Rectifier Assembly
(67) Exciter Rotor
(68) Exciter Stator
(69) Bearing
(70) Main Stator
(71) Main Rotor
(72) Rotor Shaft
(73) Fan
Illustration 7 g01233154
1600 Frame Two Bearing Internal Excitation (IE) Generator
(81) Sleeve
(82) Rectifier Assembly
(83) Exciter Rotor
(84) Exciter Stator
(85) Bearing
(86) Main Stator
(87) Main Rotor
(88) Rotor Shaft
(89) Fan
(90) Bearing
Illustration 8 g01251400
Generator Wiring Diagram for the SR5 1400 Frame, 1600 Frame, and the 1800 Frame
(CR1 - CR6) Diodes
(CR7) Varistor
(L1) Exciter Stator
(L2) Exciter Rotor
(L3) Main Rotor
(L4) Main Stator
(L5) PMG Stator
(PM) Permanent Magnet
(R5) Resistor
(RFA) Rotating field assembly
(TR1) STD Voltage droop transformer
(T0, T1, T2, T3) Generator Terminals and/or Generator leads Rotating Field Assembly (RFA)
Illustration 9 g01320915
1800 Frame Generator RFA Components (PMPE Type)
(91) PMG Permanent Magnet
(92) Exciter Rotor
(93) Bearing
(94) Main Rotor
(95) Rotor Shaft
(96) Rectifiers The RFA components attach to rotor shaft (95), which is supported by the engine flywheel and bearing.
Illustration 10 g01321233
(100) Main Rotor
(101) Main Stator Housing
(102) Main Stator The generator main stator is stationary. The generator main field is the rotor.Main Rotor
Illustration 11 g01320914
Rotating Field Assembly (RFA)
(94) Main Rotor (L3) Generator main rotor (94) is part of the RFA.Exciter
Illustration 12 g01320948
(105) Exciter Rotor
(106) Exciter Stator PMG Exciter
Illustration 13 g01320956
(107) PMG Magnet
(108) PMG Stator The