SPACER 9D6598 - Caterpillar

monitoring system is an onboard system with the following features:
Machine systems are monitored and displayed by the Advisor module for the operator.
The productivity information for the Payload is measured by the system. The information is stored by the VIMS 3G. This information can be downloaded later for analysis.
Abnormal machine conditions and/or incorrect operation of the machine are identified. The diagnosis of these abnormal conditions will allow the operator to modify the operation of the machine to correct the problem. The service technician is able to schedule maintenance for the machine if the condition is not related to the operation of the machine.
Prognostic information that can help predict potential problems before failures can occur. Prognostic information allows the maintenance of the machine to be scheduled during the preventive maintenance servicing interval.The components of a typical monitoring system are listed as follows:
Advisor module
Electronic Control Modules (ECMs)
Sensors
Payload lampsThe Advisor display provides the operator with the following information:
Operating characteristics of the machine
Diagnostics
Service information
Warning events
Modes of operation
Payload informationInstantaneous information and lifetime totals for the machine as well as the condition and performance of the machine is constantly gathered by the monitoring system. The Advisor module will display some information on the LCD display. The operator is able to adjust many of the settings to match the machine to the desired application.