SPACER 9M9972 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT2712 Guide Stud 2
B 7M-7456 Bearing Mount Compound -
Illustration 1 g01871015
Remove two of bolts (1) and install Tooling (A).
Use two people to remove flywheel (2). The weight of flywheel (2) is approximately 41 kg (90 lb). Remove remaining bolts (1) and flywheel (2).
Use a hammer and a punch in order to remove the ring gear. Installation Procedure
Always wear protective gloves when handling parts that have been heated.
Install flywheel (2) in reverse order of removal.
Raise the temperature of the ring gear. Use a soft hammer in order to seat the ring gear on the flywheel.
Apply Tooling (B) to the threads of bolts (1).