SPACER 9T1711 - Caterpillar

Illustration 9 g00900333
Remove cover (11) .
Illustration 10 g00900332
Remove seal (12) from cover (11) .
Illustration 11 g00900331
Remove O-ring seal (13) .
Illustration 12 g00900330
Remove shims (14) .
Illustration 13 g00900329
Illustration 14 g00991361
Install Tooling (C) .Note: Protect the shaft. Use shrink wrap or electrical tape.
Remove rotary group (14A) from the housing.
Illustration 15 g00900326
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove Tooling (B) from barrel (15) .
Remove barrel (15) .
Illustration 16 g00900325
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove spring (16) and shim (17) from barrel (15) .
Illustration 17 g00900324
Remove screws (18) from retainer plate (19) .
Illustration 18 g00900323
Remove pistons (20) from retainer plate (19) .
Illustration 19 g00900321
Remove piston ring (21) from piston (20) .
Illustration 20 g00900319
Remove disc (22) and center pin (23) .
Illustration 21 g00900318
Use Tooling (D) in order to remove retaining ring (24) .
Illustration 22 g00900806
Use Tooling (E) in order to remove bearing (25) and bearing (26) .