SPECIAL AR 3157393 - Caterpillar

Illustration 1 g02563358
Place a suitable lifting device under generator (33). The weight of generator (33) is approximately 223 kg (492 lb). Install generator (33) and bolts (34).
Illustration 2 g02561596
Place harness assembly (29) into position. Install the cable straps that secure harness assembly (29) to the machine and to the fender.
Illustration 3 g02561763
Install clamps (32) securing harness assembly (29) to the machine.
Illustration 4 g02561782
Connect connectors (30).
Install the ground wire assembly and nut (31).
Illustration 5 g02561781
Install cover assembly (27) and tighten the bolts.
Install the bolts, the plate, and clamps (28) that secure harness assembly (29) to the screed.
Illustration 6 g02555647
Illustration 7 g02556436
Install cable assembly (24) and the nut.
Install harness assemblies (23) and the nut.
Install harness assemblies (22) and connector (26).
Install harness assemblies (21) and connector (25).
Install lock nut (20) and lock nut (19).
Illustration 8 g02555646
Connect wire (18), wire (17), wire (16), wire (15), wire (14), and wire (13).
Illustration 9 g02555644
Install cover (12) and the bolts.
Illustration 10 g02557619
Install panel (11) and the bolts.
Illustration 11 g02557600
Install door assembly (8), plate (10), and the bolts.
Install clamp (9) and the bolt.
Illustration 12 g02556703
Install plate (6), support brackets (7), and the bolts.
Illustration 13 g02556702
Place hose assemblies (4) into position and install bolts (5).
Install clamp (3) and the nut.
Illustration 14 g02555641
Install fender (1), fender (2), and the bolts.
Illustration 15 g02556008
Install the cable straps on top of fender (1). End By:
Install the piston motor (hydraulic generator). Refer to Disassembly and Assembly, "Piston Motor (Hydraulic Generator) - Install".
Install the hydraulic cylinder (tow point). Refer to Disassembly and Assembly, "Hydraulic Cylinder (Tow Point) - Remove and Install".
Install the rear wheel. Refer to Disassembly and Assembly, "Wheel (Rear) - Remove and Install".