1010681 SPIDER AS Caterpillar parts
24H, D10N
Rating:
Alternative (cross code) number:
CA1010681
101-0681
1010681
CA1010681
101-0681
1010681
Weight: 120 pounds 54 kg.
Information:
BLADE WIDTH
110.2
mm
BOLT CIRCLE DIAMETER
165.1
mm
DIAMETER OF PITCH CIRCLE HOLES
10.5
mm
HUB THICKNESS
9.5
mm
NUMBER OF BLADES
8
NUMBER OF PITCH HOLES
8
OD
1346.2
mm
PILOT HOLE DIAMETER
130.2
mm
TYPE
BLOWER
MOTOR GRADER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CHANGING TOWELS For Sale Whte Red Black 1 Double Sided 18x24 in Yard Road Sign w/stand
Work House Signs Heavy-Duty & Weatherproof – Built to last with industrial-strength materials that resist fading, cracking, and warping in rain, sun, snow, or wind—perfect for any outdoor environment. || Large 18"x24" Size for Maximum Visibility – Get your message seen from a distance with this generously sized yard sign, ideal for drive-by traffic and foot visibility. || UV-Resistant for Long-Term Use – Advanced UV protection prevents sun damage, ensuring bold colors and clear messaging even after months of outdoor exposure. || Easy to Install & Reuse – Quick setup with wire stakes (sold separately or included), plus durable construction allows for multiple uses across seasons and events. || Versatile for Home or Business – Great for political campaigns, garage sales, real estate, business promotions, yard décor, event announcements, or custom messages
Work House Signs Heavy-Duty & Weatherproof – Built to last with industrial-strength materials that resist fading, cracking, and warping in rain, sun, snow, or wind—perfect for any outdoor environment. || Large 18"x24" Size for Maximum Visibility – Get your message seen from a distance with this generously sized yard sign, ideal for drive-by traffic and foot visibility. || UV-Resistant for Long-Term Use – Advanced UV protection prevents sun damage, ensuring bold colors and clear messaging even after months of outdoor exposure. || Easy to Install & Reuse – Quick setup with wire stakes (sold separately or included), plus durable construction allows for multiple uses across seasons and events. || Versatile for Home or Business – Great for political campaigns, garage sales, real estate, business promotions, yard décor, event announcements, or custom messages
Toland Home Garden 1010681 Nicaragua 28 x 40 Inch Decorative, House Flag (28" x 40")
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || HOUSE FLAG SIZE: This Toland's 'Flag of Nicaragua Flag' is the large House size (28 x 40") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DÉCOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || SINGLE SIDED FLAG: Design is one sided with the image printed and visible from both sides while text appears correctly on one side. Artistic flags hang beautifully from a sewn-in sleeve and it's easy to switch out our seasonal flag designs
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || HOUSE FLAG SIZE: This Toland's 'Flag of Nicaragua Flag' is the large House size (28 x 40") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DÉCOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || SINGLE SIDED FLAG: Design is one sided with the image printed and visible from both sides while text appears correctly on one side. Artistic flags hang beautifully from a sewn-in sleeve and it's easy to switch out our seasonal flag designs
Toland Home Garden 1010681 Nicaragua 28 x 40 Inch Decorative, House Flag (28" x 40")
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || HOUSE FLAG SIZE: This Toland's 'Flag of Nicaragua Flag' is the large House size (28 x 40") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DÉCOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || SINGLE SIDED FLAG: Design is one sided with the image printed and visible from both sides while text appears correctly on one side. Artistic flags hang beautifully from a sewn-in sleeve and it's easy to switch out our seasonal flag designs
Toland Home Garden DURABLE FLAG: Toland Home Garden's durable indoor, outdoor art flags and banners are made of machine washable 100% polyester || HOUSE FLAG SIZE: This Toland's 'Flag of Nicaragua Flag' is the large House size (28 x 40") || PRODUCED IN USA: Flags are printed in the USA creating colorful, vibrant, bright designs from original artwork || HOME DÉCOR: Since 1976, Toland has been producing premium, quality flags that make great gifts for any deck, patio, porch or veranda and make charming decorative statements for any backyard, lawn or garden || SINGLE SIDED FLAG: Design is one sided with the image printed and visible from both sides while text appears correctly on one side. Artistic flags hang beautifully from a sewn-in sleeve and it's easy to switch out our seasonal flag designs
Number on catalog scheme:
2
For full view, you need register
Information:
Check the Wires for Damaged Insulation
Perform the following inspection:
Inspect each wire for the following conditions:
Abrasion
Nicks
Cuts
Exposed insulation
Chafing on the chassis
Chafing against a sharp point
Check all of the harness fasteners to verify that the harness is properly secured and not compressed.
Pull back the harness sleeves to check for a flattened portion of wire.An overtightened fastener will flatten the harness and damage the wires.Expected Result
The wires are free of abrasion, nicks, and cuts. The harness is properly clamped and not compressed.Results
OK - The harness is OK. Proceed to "Inspect the Connector Terminals".Not OK - The harness has damage.Repair
Repair or replace the harness.Verify that the problem has been corrected.STOPInspect the Connector Terminals
Perform the following inspection:
Visually inspect each terminal in the connector:
Terminal damage
Terminal alignment in the connector
Terminal location in the connectorExpected Result
The terminals are properly aligned and undamaged.Results
OK - The terminals are properly aligned and undamaged. Proceed to "Perform a Pull Test on Each Wire Terminal Connection".Not OK - The terminals are not properly aligned or are damaged.Repair
Repair or replace the terminals. Verify that the problem has been corrected.STOPPerform a Pull Test on Each Wire Terminal Connection
Perform the following inspection:
Illustration 3 g03553061
(4) Locking wedge (Typical)
Ensure that the connector locking wedge (4) is installed properly. Terminals cannot be retained inside the connector if the locking wedge (4) is not installed properly. See Illustration 3.
Perform a 45 N (10 lb) pull test on each wire.Each terminal and connector should easily withstand 45 N (10 lb) of tension and each wire should remain in the connector body. This test checks the wire crimping and the terminal insertion into the connector.Expected Result
Each terminal and connector with stands 45 N (10 lb) of pull and each wire remains in the connector body. Results
OK - All terminals pass the pull test. Proceed to "Check Individual Pin Retention in the Socket".Not OK - A wire has been pulled from a terminal or a terminal has been pulled from the connector.Repair
Replace damaged terminals and connectors.Note: Use the calibrated 1U-5804 Crimp Tool (12-GA TO 18-GA) to replace the terminals or connectors.Verify that the problem has been corrected.STOPCheck Individual Socket Pin Retention
Perform the following inspection:
Sockets provide good retention for the pins.
If the pins are loose in the socket, perform the following:
Disconnect the harness.
Insert a new pin into each socket.
Check for good pin grip by the socket.Expected Result
The sockets provide good retention for the new pin.Results
OK - The sockets are OK. Proceed to "Check the Locking Mechanism of the Connectors".Not OK - Sockets are damaged.Repair
Use a calibrated 1U-5804 Crimp Tool (12-GA to 18-GA) to replace the damaged sockets.Verify that the problem has been corrected.STOPCheck the Locking Mechanism of the Connectors
Perform the following inspection:
Connectors lock properly.
After locking the connectors, ensure that the two halves cannot be pulled apart.
Verify that the connector latch tab is properly latched.
Verify that the connector latch tab returns to the locked position.Expected Result
The connector securely locks. The connector and the locking mechanism are without cracks or breaks.Results
OK - The connector locking mechanisms are in good repair. Proceed to "Perform a Wiggle
Perform the following inspection:
Inspect each wire for the following conditions:
Abrasion
Nicks
Cuts
Exposed insulation
Chafing on the chassis
Chafing against a sharp point
Check all of the harness fasteners to verify that the harness is properly secured and not compressed.
Pull back the harness sleeves to check for a flattened portion of wire.An overtightened fastener will flatten the harness and damage the wires.Expected Result
The wires are free of abrasion, nicks, and cuts. The harness is properly clamped and not compressed.Results
OK - The harness is OK. Proceed to "Inspect the Connector Terminals".Not OK - The harness has damage.Repair
Repair or replace the harness.Verify that the problem has been corrected.STOPInspect the Connector Terminals
Perform the following inspection:
Visually inspect each terminal in the connector:
Terminal damage
Terminal alignment in the connector
Terminal location in the connectorExpected Result
The terminals are properly aligned and undamaged.Results
OK - The terminals are properly aligned and undamaged. Proceed to "Perform a Pull Test on Each Wire Terminal Connection".Not OK - The terminals are not properly aligned or are damaged.Repair
Repair or replace the terminals. Verify that the problem has been corrected.STOPPerform a Pull Test on Each Wire Terminal Connection
Perform the following inspection:
Illustration 3 g03553061
(4) Locking wedge (Typical)
Ensure that the connector locking wedge (4) is installed properly. Terminals cannot be retained inside the connector if the locking wedge (4) is not installed properly. See Illustration 3.
Perform a 45 N (10 lb) pull test on each wire.Each terminal and connector should easily withstand 45 N (10 lb) of tension and each wire should remain in the connector body. This test checks the wire crimping and the terminal insertion into the connector.Expected Result
Each terminal and connector with stands 45 N (10 lb) of pull and each wire remains in the connector body. Results
OK - All terminals pass the pull test. Proceed to "Check Individual Pin Retention in the Socket".Not OK - A wire has been pulled from a terminal or a terminal has been pulled from the connector.Repair
Replace damaged terminals and connectors.Note: Use the calibrated 1U-5804 Crimp Tool (12-GA TO 18-GA) to replace the terminals or connectors.Verify that the problem has been corrected.STOPCheck Individual Socket Pin Retention
Perform the following inspection:
Sockets provide good retention for the pins.
If the pins are loose in the socket, perform the following:
Disconnect the harness.
Insert a new pin into each socket.
Check for good pin grip by the socket.Expected Result
The sockets provide good retention for the new pin.Results
OK - The sockets are OK. Proceed to "Check the Locking Mechanism of the Connectors".Not OK - Sockets are damaged.Repair
Use a calibrated 1U-5804 Crimp Tool (12-GA to 18-GA) to replace the damaged sockets.Verify that the problem has been corrected.STOPCheck the Locking Mechanism of the Connectors
Perform the following inspection:
Connectors lock properly.
After locking the connectors, ensure that the two halves cannot be pulled apart.
Verify that the connector latch tab is properly latched.
Verify that the connector latch tab returns to the locked position.Expected Result
The connector securely locks. The connector and the locking mechanism are without cracks or breaks.Results
OK - The connector locking mechanisms are in good repair. Proceed to "Perform a Wiggle
Caterpillar parts catalog:
Parts spider Caterpillar catalog:
24H, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 65, 65C, 65E, 69D, 75, 75C, 75D, 75E, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 85C, 85D, 85E, 95E, 980G, 9...
24H, 24M, 770, 772, 776C, 776D, 777D, 777F, 777G, 834G, 834H, 834K, 836G, 836H, 836K, 854G, 854K, 986H, 988G, 988H, 988K, 992G, 992K, 993K, 994, 994D, 994F, 994H, D11N, D11R, D11T
24M, 735, 735B, 740, 740B, 769D, 771D, 772G, 772G OEM, 773D, 773E, 773F, 775D, 775E, 775F, D10N
1779388
SPIDER AS-FAN
D10N, D10R
D10N, D10R
2511253
SPIDER AS-FAN
D10N, D10R, D10T
D10N, D10R, D10T
7W6175
SPIDER AS-FAN
D10N
D10N
8N9005
SPIDER AS-FAN
D11N
D11N
1779388
SPIDER AS-FAN
D10N, D10R
D10N, D10R
3101512
SPIDER AS-FAN
D8N, D8R, D8T
D8N, D8R, D8T