SPIDER AS-FAN 1976336 - Caterpillar

Illustration 20 g06114753To uninstall security, set the appropriate “External Authentication Device” setting or “Advanced Machine Security System” to Not Installed. Subsequently, select the “Machine Security System Uninstall” option in the Service Menu to complete the uninstallation. Consult your Cat Dealer.Pass Code Security (If Enabled)
Basic Operation
Move the ignition key to the run position to power the display and load the pass code entry screen. Use the Four Way Navigation arrow buttons to enter in the pass code. The default pass code when the system is initially enabled is 1111. The user will have five attempts to enter a valid pass code. After five invalid attempts, the display will block code entry for 15 minutes. When a valid code entry is received, the display will prompt the user that engine operation is allowed. Refer to the "Engine Starting" section for the normal starting procedure.
Illustration 21 g03749369When the user stops the machine by switching the ignition key from run to off, the display will prompt the user to lock security or keep it unlocked.
Press OK and security will lock within 30 seconds. The next time the user turns on the ignition key, operator will be prompted to enter pass code.
Press X to leave security unlocked for 15 minutes. The user will not be prompted for pass code if operator turns the ignition back on within 15 minutes.
The default action is to keep security unlocked if no choice is received within 10 seconds.
Illustration 22 g03749383Operating Settings
The Pass Code Security System supports up to 25 different pass codes. A group of machine settings is connected to each unique pass code. When a valid pass code is entered in the display, the machine settings from the previous time that pass code was entered will automatically be recalled. This setup is helpful when multiple operators are using the same machine.Pass Code Management
Security Pass Codes can be managed via Cat Electronic Technician (ET) or the display. The available functionality differs between each as shown in the table. For Cat ET, go to the "Security Management" screen in the "Service" menu. For the display, navigate to the "Manage Operators" menu within the "Operator" menu. Either mechanism will require the user to enter first a pass code with "Master" access level on the display. The default pass code, 1111, is set up as "Master". "Standard" access level will not have the ability to manage pass codes.0
Table 1
Feature Cat Electronic
Technician Display
Add Pass Codes X X
Delete Pass Codes X X
View list of all pass codes X
Change name or access level of existing pass code X
Copy pass code list to other machines X
Access Level: Master pass codes are allowed to add and delete pass codes via the display. Standard pass codes cannot.
Operator Name: 11 character name that will be displayed on the Information Area of the display.
Pass Code: 4 to 7-digit pass code that operator will use to unlock security. Each pass code in the system must have a unique number.Pass codes can be deleted via the display or Cat ET. The system requires