2617504 SPIDER AS-FAN Caterpillar parts
D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
Rating:
Alternative (cross code) number:
CA2617504
261-7504
2617504
CA2617504
261-7504
2617504
Weight: 7 pounds 3 kg.
Information:
BLADE WIDTH
108.7
mm
BOLT CIRCLE DIAMETER
88.9
mm
DIAMETER OF PITCH CIRCLE HOLES
10.3
mm
HUB THICKNESS
4.16
mm
NUMBER OF BLADES
7
NUMBER OF PITCH HOLES
6
OD
635
mm
PILOT HOLE DIAMETER
50.8
mm
TYPE
SUCTION
PIPELAYER, TRACK-TYPE TRACTOR,
Compatible equipment models: 2617504:
Number on catalog scheme:
3
For full view, you need register
Information:
Illustration 1 g00289497
Speed Sensor (1) Speed sensor (2) Locknut (A) Air gapNote: The engine speed sensor is commonly referred as a magnetic pickup sensor.This adjustment procedure is for the engine speed sensor.
Remove the speed sensor (1) from the flywheel housing. Remove all debris from the tip of the speed sensor. Align a ring gear tooth directly in the center of the threaded sensor opening.
By hand, screw the speed sensor (1) into the hole until the end of the sensor contacts the gear tooth.
Turn the sensor (1) in the counterclockwise direction through 270 degrees (three-fourths turn).
Tighten locknut (2) to 25 5 N m (18 4 lb ft).Note: Do not allow speed sensor (1) to turn as locknut (2) is tightened.
Caterpillar parts catalog:
Parts spider Caterpillar catalog:
572R II, D7R, D7R II, D8R
1755188
SPIDER & BEARING GP
561N, D5N
561N, D5N
1874484
SPIDER AS-FAN
561N, D5N
561N, D5N
1K3957
SPIDER
561B, 561C, 561D
561B, 561C, 561D
951B, 955H
7M4755
SPIDER ASSEM.
561B, D4D
561B, D4D
3589211
SPIDER AS-FAN
D6R, D6R STD, D7R XR
D6R, D6R STD, D7R XR
950 GC, 950H, 950K, 962H, 962K, 966F II, D6T LGP, D6T LGPPAT, D6T XL, IT62H