SPIDER AS-FAN 2797397 - Caterpillar

Illustration 1 g03780763
Table 1
Specification for 366-9466 Front Axle Gp
Item Qty Part Specification Description
- Coat king pin bores, seals, and o-rings with desert gold grease.
1 8 199-0783 Bolt Torque to 255 to 315 N m (188 to 232 lb ft).
2 As required, use the following shims during bearing preload.
8 198-7841 Shim Thickness is 0.15 mm (0.006 inch).
8 198-7842 Shim Thickness is 0.20 mm (0.008 inch).
4 198-7843 Shim Thickness is 0.50 mm (0.020 inch).
3 1 253-5024 Breather Torque to 6.5 to 10.5 N m (57.5 to 92.9 lb in).
4 8 199-0683 Bolt Torque to 255 to 315 N m (188 to 232 lb ft).
5 2 198-7835 Tie Rod Nut Torque to 238 to 294 N m (176 to 217 lb ft).
6 2 - Tighten the nut to 212.50 to 262.50 N m (156.73 to 193.61 lb ft).
7 2 - Tighten the locknut to 255 to 315 N m (188 to 232 lb ft).
8 6 290-4164 Bolt Before assembly, apply Loctite 638 to the threads. Remove the excess sealant after assembly.
Torque to 578 to 714 N m (426 to 527 lb ft).
9 3 152-6144 Drain Plug As Torque to 39 to 63 N m (29 to 46 lb ft)
10 2 198-7811 Dowel Before assembly, apply Loctite 638 to the threads.
11 - Before assembly, apply Loctite high flex gasket maker. Remove the excess sealant after assembly.
12 10 199-0677 Bolt Torque to 252.7 to 279.3 N m (186.5 to 206.0 lb ft).
13 - - Before assembly, apply Loctite 270 to the threads.
14 1 - Tighten the nut to 150 N m (111 lb ft).
15 4 8C-7505 Flat Head Screw Torque to 16.25 26.25 N m (143.82 232.33 lb in).