SPIDER & BEARING AS 2G4157 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01035650
Use Tooling (A) to remove engine oil filter (1). Remove bolts (3) and (4). Remove engine oil filter base (2) .
Illustration 2 g01035651
Remove O-ring seal (5) from bolt (3). Remove O-ring seal (6) from engine oil filter base (2) .Installation Procedure
Illustration 3 g01035651
Install O-ring seal (6) on engine oil filter base (2). Install O-ring seal (5) on bolt (3) .
Illustration 4 g01035650
Position engine oil filter base (2). Install bolts (3) and (4). Install engine oil filter (1) .