SPIDER & BRG.A 2H0858 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g06089716
Illustration 2 g06089719
Disconnect harness assemblies (1) and disconnect hose assembly (2).
Attach Tooling (A) and a suitable lifting device to water temperature control valve (4) then remove bolts (3), bolts (5), and bolts (6). The approximate weight of water temperature control valve (4) is 55 kg (121.3 lb).
Remove the water temperature control valve (4).