SPIDER 3106051 - Caterpillar

3106051 SPIDER Caterpillar parts 10-20B, AP-1055D, AS2252C, AS2302, AS2302C, AS3251C, AS3301C, BG-2455D, BG-260D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3106051
310-6051
3106051

Weight: 0.02 pounds 0 kg.

Buy SPIDER 3106051 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT PAVER, ASPHALT SCREED,

Compatible equipment models: 3106051:

ASPHALT PAVER AP-1055D BG-2455D BG-260D

ASPHALT SCREED 10-20B AS2252C AS2302 AS2302C AS3251C AS3301C Caterpillar

Number on catalog scheme: 41

For full view, you need register

Information:

g01067463
Do not use aerosol types of starting aids such as ether. Such use could result in an explosion and personal injury.
Refer to Operation and Maintenance Manual, "Engine Starting" for further information.(7) Jump Start CablesThis safety message is located next to the battery.
g01067366
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.(8) High Pressure GasThis safety message is located on the accumulator.
g01067549
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
(9) Relieve Hydraulic Tank PressureThis safety message is located on the hydraulic tank.
g01067344
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
(10) High Pressure CylinderThis safety message is located on the track adjuster.
g01065467
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the proper service procedure.(11) Crushing HazardThis safety message is located in two places on the rear of the machine.
g01067376
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
(12) Pressurized SystemThis safety message is located on the inside of the hood on the radiator.
g01109238
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for further information.