SPIDER & BEARING GP 4E3462 - Caterpillar

Illustration 1 g00635632
FLOAT (1) - Move the lever forward to position (1). This position will allow the loader bucket to move along the ground contour. Do not use this position to lower the loader bucket. The lever will stay in the FLOAT position until the lever is moved back to the HOLD position or to another position.
LOWER (2) - Move the lever to position (2) in order to lower the loader bucket.
HOLD (3) - Move the lever to position (3) in order to stop movement of the loader bucket. When you release the lever from any position except for the FLOAT position, the lever will return to the HOLD position.
RAISE (4) - Move the lever to position (4) in order to raise the loader bucket.
TILT BACK (5) - Move the lever to position (5) in order to rack back the loader bucket.
RETURN-TO-DIG (6) - Move the lever to position (6) in order to return the loader bucket to the dig position. The lever will stay in this position until the bucket is level. Then, the lever will automatically return to the HOLD position.
DUMP (7) - Move the lever to position (7) in order to empty the loader bucket. QUICK DUMP (8) - Move the lever all the way toward the right. This will shorten the time that is required to tilt the attachment forward.
Illustration 2 g00635640
TRANSMISSION NEUTRALIZER (9) - Push the button when all available engine power is desired in the loader hydraulics. Push the button in order to disengage the transmission from the driving wheels. Release the button in order to return the transmission into the previously selected gear. The machine is free to roll away after the button is pushed. Push the brakes in order to stop machine movement.