SPIDER AS-FAN 6I1710 - Caterpillar

6I1710 SPIDER AS-FAN Caterpillar parts 231D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6I1710
6I-1710
6I1710

Weight: 28 pounds 12 kg.

Information:

BLADE WIDTH 101.5 mm

BOLT CIRCLE DIAMETER 88.9 mm

DIAMETER OF PITCH CIRCLE HOLES 11 mm

HUB THICKNESS 10.8 mm

NUMBER OF BLADES 8

NUMBER OF PITCH HOLES 6

OD 710.4 mm

PILOT HOLE DIAMETER 50.84 mm

TYPE SUCTION

Buy SPIDER AS-FAN 6I1710 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 6I1710:

EXCAVATOR 231D Caterpillar

Number on catalog scheme: 1

Caterpillar 6I1710 Parts scheme SPIDER AS-FAN

For full view, you need register

Information:

Introduction
The battery charger power supply circuit fuse is too small on 3456 and 3406 common design generator set packages.Problem
On 3456 and 3406 Common Design (PGAG) generator set packages, the battery charger power supply circuit fuse ( 190-2558 Fuse ) is too small and may fail. This failure may result in the loss of power to the battery charger. If there is a loss of power to the battery charger, the package batteries will not be charged and may drain to a level insufficient to start the generator set. In this case, the generator set controller will cease operating.Solution
Locate the battery charger power supply circuit fuseholder (F17) which is located in the generator set package terminal box.
Open fuseholder F17 and replace the existing 6 Amp fuse ( 190-2558 Fuse ) with a new 10 Amp fuse ( 6V-7802 Fuse ).
Close fuseholder F17 and check the battery charger for proper operation.