7H3958 SPIDER AND BEARING ASSEM. Caterpillar parts
583H, 583K, 627B, 637, 637B, 637D, 641, 650B, 651, 657, 657B, 666, 769, 773, 824B, 826B, 834, 980C, 988, 988B, D8H, D8K, D9E, D9G, D9H
Rating:
Alternative (cross code) number:
CA7H3958
7H-3958
7H3958
CA7H3958
7H-3958
7H3958
Weight: 0.02 pounds 0 kg.
LANDFILL COMPACTOR, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
7H3958 SPIDER & BEARING KIT Suitable For Caterpillar® 7H3958
KMP BRAND Suitable for Caterpillar
KMP BRAND Suitable for Caterpillar
7H3958 SPIDER & BEARING KIT Suitable For Caterpillar® 7H3958
KMP BRAND Suitable for Caterpillar
KMP BRAND Suitable for Caterpillar
Stevens Lake Parts One New Spider Fits Caterpillar Models 7H3958 7H3958-A 9V7710 9V7710-A
Stevens Lake Parts One New Spider || This Is An Aftermarket Part Made To Replace Its OEM Counterpart. || Interchangeable With 7H3958 7H3958-A 9V7710 9V7710-A || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
Stevens Lake Parts One New Spider || This Is An Aftermarket Part Made To Replace Its OEM Counterpart. || Interchangeable With 7H3958 7H3958-A 9V7710 9V7710-A || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 7H3958:
Information:
Removal Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller Gp 1
B 1U-7325 Distorter Adapter -
6V-3143 Distorter Adapter(1) -
C 5P-7409 Sleeve Distorter 1
D 6V-4003 (2) Seal Locator As 1
2N-5006 (2) Bolt 2
E 8T-3099 (2) Seal Installer 1
F 9S-8858 (2) Nut 1
G - Loctite 7649 Primer N 1
H - Loctite 620 Retaining Compound 1
J 452-6011 Multipurpose Grease 1
K 484-7863 (3) Tool As 1
(1) For use with engines equipped with a deal adapter.
(2) For installation of seals 113-8432 and 113-8433
(3) For Installation of seals 436-1478 and 436-1479
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Every time that the crankshaft seal is removed from the wear sleeve, a new wear sleeve and crankshaft seal must be installed.
Start By:
Remove flywheel.
Illustration 1 g06056189
Drill three evenly spaced holes in crankshaft rear seal (1). Use Tooling (A) to remove crankshaft rear seal (1).
Insert Tooling (B) between the rear housing and wear sleeve (2).
The use of excessive force on the sleeve distorter can cause the distorter adapter to crack the housing. To help avoid damage to the engine, do not use excessive force to remove the wear sleeve.
Insert Tooling (C) between Tooling (B) and wear sleeve (2). Carefully turn Tooling (C) until the edge of the tool causes a cease in wear sleeve (2).
Repeat this procedure several times around wear sleeve (2) until wear sleeve (2) can be removed by hand.Installation Procedure
Illustration 2 g01005029
Illustration 3 g01207497
Attach Tooling (D) to the crankshaft.
Clean the outer diameter of the crankshaft and the inner diameter of the new wear sleeve with Tooling (G).
Apply Tooling (H) to the outer diameter of the crankshaft and the inner diameter of the new wear sleeve.
If the crankshaft seal and the wear sleeve come apart during installation, the crankshaft seal and the wear sleeve must be replaced.
Note: The front crankshaft seal and the wear sleeve cannot be interchanged with the rear crankshaft seal and the wear sleeve.
Table 1
Required Tooling
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller Gp 1
B 1U-7325 Distorter Adapter -
6V-3143 Distorter Adapter(1) -
C 5P-7409 Sleeve Distorter 1
D 6V-4003 (2) Seal Locator As 1
2N-5006 (2) Bolt 2
E 8T-3099 (2) Seal Installer 1
F 9S-8858 (2) Nut 1
G - Loctite 7649 Primer N 1
H - Loctite 620 Retaining Compound 1
J 452-6011 Multipurpose Grease 1
K 484-7863 (3) Tool As 1
(1) For use with engines equipped with a deal adapter.
(2) For installation of seals 113-8432 and 113-8433
(3) For Installation of seals 436-1478 and 436-1479
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Every time that the crankshaft seal is removed from the wear sleeve, a new wear sleeve and crankshaft seal must be installed.
Start By:
Remove flywheel.
Illustration 1 g06056189
Drill three evenly spaced holes in crankshaft rear seal (1). Use Tooling (A) to remove crankshaft rear seal (1).
Insert Tooling (B) between the rear housing and wear sleeve (2).
The use of excessive force on the sleeve distorter can cause the distorter adapter to crack the housing. To help avoid damage to the engine, do not use excessive force to remove the wear sleeve.
Insert Tooling (C) between Tooling (B) and wear sleeve (2). Carefully turn Tooling (C) until the edge of the tool causes a cease in wear sleeve (2).
Repeat this procedure several times around wear sleeve (2) until wear sleeve (2) can be removed by hand.Installation Procedure
Illustration 2 g01005029
Illustration 3 g01207497
Attach Tooling (D) to the crankshaft.
Clean the outer diameter of the crankshaft and the inner diameter of the new wear sleeve with Tooling (G).
Apply Tooling (H) to the outer diameter of the crankshaft and the inner diameter of the new wear sleeve.
If the crankshaft seal and the wear sleeve come apart during installation, the crankshaft seal and the wear sleeve must be replaced.
Note: The front crankshaft seal and the wear sleeve cannot be interchanged with the rear crankshaft seal and the wear sleeve.
Cat SIS web machinery list:
Parts spider Caterpillar catalog:
571G, 773, 910, 931B, D3, D4D, D4E
16, 824B, 983, 983B, 988, AD55, D35HP, D400, D40D, D8K
D9G, D9N
16, 515, 525, 563C, 573C, 613C, 621, 815, 834B, 836, 950, 966C, 988B, 988F, 988F II, AD30, D250B, D250D, D250E, D300B, D300D, D300E, D7F, D7G, R2900, R2900G, R3000H, RM-350B
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 988
631C, 988, D8H
769C, 834B, 988B
545, 545C, 824C, 825C, 826C, 966G, 966G II, 966H, 966K, 972G, 972G II, 972H, 972K, 980C, 980F, R1700 II
1P4291
SPIDER ASSEM.
631C, 983
631C, 983
127, 572G, 594, 594H, 619
117, 561D, 571G, 977D
9J0695
SPIDER
130G, 613B, 931, D3
130G, 613B, 931, D3
910, 931, D3B, D3C II
572G, D7F, D7G, D7G2
16, 824B, 983, 983B, 988, AD55, D35HP, D400, D40D, D8K