SPINDLE 1166260 - Caterpillar

Illustration 1 g02724639
Table 1
Specification for 206-1264 Track Roller Gp
Item Qty Part Specification Description
1 - - Before assembly, the surfaces must be clean and free from protective coating.
2 2 8F-6711 O-Ring Seal Lubricate the bore with the lubricant that is being sealed.
3 2 206-9212 Duo-Cone Seal Gp The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.
4 2 6Y-1782 Track Roller Bearing Inside diameter after assembly is 65.28 0.09 mm (2.570 0.004 inch).
5 1 9w-2146 Plug Apply blue Loctite 242 to the threads.
Torque to 28 5 N m (248 44 lb in).
A - - End play for the track roller shaft:
Minimum is 0.25 mm (0.010 inch).
Maximum is 1.25 mm (0.049 inch).